GMCforum: GMCnet » Half shaft alignment observations

Home » Public Forums » GMCnet » Half shaft alignment observations

Show: Today's Messages :: Polls :: Message Navigator

Half shaft alignment observations [message #296361]

Sun, 28 February 2016 19:15

dr.diesel

Messages: 85
Registered: April 2015
Location: The Haute, Indiana

Karma:

Member

Something else I recently completed this winter was the Manny 1-Ton front end conversion. Something I noticed during work was the mating flanges were not properly aligned. I took a quick video to further illustrate:

https://youtu.be/_mq8KzvJ1dA

The inside CV houses quite a bit of mass, upwards of 50+ MPH generated noticeable vibration. I'd thought there was an inside centering ring on the half shaft for alignment, but i was wrong, just the bolts are used for alignment. I've not yet attempted to loosen the bolts and center, I have doubts that even if I do it will stay in that position for long.

Any thoughts?

77 Kingsley

Report message to a moderator

[Message index]

		Half shaft alignment observations By: dr.diesel on Sun, 28 February 2016 19:15
		Re: Half shaft alignment observations By: RF_Burns on Sun, 28 February 2016 19:45
		Re: Half shaft alignment observations By: Richard RV on Sun, 28 February 2016 20:38
		Re: [GMCnet] Half shaft alignment observations By: Ken Henderson on Sun, 28 February 2016 19:45
		Re: [GMCnet] Half shaft alignment observations By: dr.diesel on Sun, 28 February 2016 20:00
		Re: [GMCnet] Half shaft alignment observations By: USAussie on Sun, 28 February 2016 20:13
		Re: [GMCnet] Half shaft alignment observations By: Ken Henderson on Sun, 28 February 2016 20:17
		Re: [GMCnet] Half shaft alignment observations By: James Hupy on Sun, 28 February 2016 20:26
		Re: Half shaft alignment observations By: dr.diesel on Sun, 28 February 2016 20:33
		Re: Half shaft alignment observations By: RF_Burns on Sun, 28 February 2016 21:17
		Re: Half shaft alignment observations By: bwevers on Mon, 29 February 2016 12:52
		Re: Half shaft alignment observations By: A Hamilto on Mon, 29 February 2016 18:02
		Re: Half shaft alignment observations By: dr.diesel on Mon, 29 February 2016 18:08
		Re: Half shaft alignment observations By: A Hamilto on Mon, 29 February 2016 18:20
		Re: [GMCnet] Half shaft alignment observations By: Ken Henderson on Mon, 29 February 2016 18:55
		Re: [GMCnet] Half shaft alignment observations By: dr.diesel on Mon, 29 February 2016 19:07
		Re: [GMCnet] Half shaft alignment observations By: James Hupy on Mon, 29 February 2016 19:01
		Re: Half shaft alignment observations By: dr.diesel on Mon, 29 February 2016 19:00
		Re: Half shaft alignment observations By: A Hamilto on Mon, 29 February 2016 19:07
		Re: Half shaft alignment observations By: A Hamilto on Mon, 29 February 2016 19:15
		Re: Half shaft alignment observations By: dr.diesel on Mon, 29 February 2016 19:19
		Re: [GMCnet] Half shaft alignment observations By: James Hupy on Mon, 29 February 2016 19:28
		Re: [GMCnet] Half shaft alignment observations By: dr.diesel on Mon, 29 February 2016 19:41
		Re: [GMCnet] Half shaft alignment observations By: James Hupy on Mon, 29 February 2016 19:50
		Re: [GMCnet] Half shaft alignment observations By: Ken Henderson on Mon, 29 February 2016 19:59
		Re: [GMCnet] Half shaft alignment observations By: USAussie on Mon, 29 February 2016 22:46
		Re: [GMCnet] Half shaft alignment observations By: Ken Henderson on Mon, 29 February 2016 23:01
		Re: [GMCnet] Half shaft alignment observations By: dr.diesel on Tue, 01 March 2016 04:50
		Re: Half shaft alignment observations By: JohnL455 on Mon, 29 February 2016 19:12
		Re: Half shaft alignment observations By: dr.diesel on Mon, 29 February 2016 19:15
		Re: Half shaft alignment observations By: bwevers on Mon, 29 February 2016 23:02
		Re: [GMCnet] Half shaft alignment observations By: jimk on Tue, 01 March 2016 00:36
		Re: Half shaft alignment observations By: dr.diesel on Tue, 01 March 2016 06:44
		Re: Half shaft alignment observations By: dr.diesel on Tue, 01 March 2016 07:12
		Re: Half shaft alignment observations By: A Hamilto on Tue, 01 March 2016 11:01
		Re: [GMCnet] Half shaft alignment observations By: Ken Henderson on Tue, 01 March 2016 13:46
		Re: [GMCnet] Half shaft alignment observations By: USAussie on Tue, 01 March 2016 15:22
		Re: [GMCnet] Half shaft alignment observations By: Dolph Santorine on Tue, 01 March 2016 15:28
		Re: [GMCnet] Half shaft alignment observations By: Ken Henderson on Tue, 01 March 2016 18:41
		Re: [GMCnet] Half shaft alignment observations By: jimk on Tue, 01 March 2016 23:34
		Re: Half shaft alignment observations By: Adrien G. on Tue, 01 March 2016 13:03
		Re: Half shaft alignment observations By: A Hamilto on Tue, 01 March 2016 13:27
		Re: [GMCnet] Half shaft alignment observations By: USAussie on Tue, 01 March 2016 13:06
		Re: Half shaft alignment observations By: dr.diesel on Tue, 01 March 2016 13:53
		Re: [GMCnet] Half shaft alignment observations By: USAussie on Tue, 01 March 2016 15:17
		Re: [GMCnet] Half shaft alignment observations By: dr.diesel on Tue, 01 March 2016 15:29
		Re: Half shaft alignment observations By: rvanwin on Thu, 03 March 2016 08:57
		Re: [GMCnet] Half shaft alignment observations By: mannystrans on Fri, 04 March 2016 00:01

Previous Topic:	Painting the cabinets...
Next Topic:	Factory 455 Camsaft Specs

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 08 21:27:44 CDT 2024

Total time taken to generate the page: 0.00885 seconds