Watch Manny reassemble a GMC transmission on a new video now available [message #295597] |
Tue, 16 February 2016 10:07 |
armandminnie
Messages: 864 Registered: May 2009 Location: Marana, AZ
Karma: 2
|
Senior Member |
|
|
At the Fall 2015 GMCWS rally in Pueblo, Manny Trovao disassembled a GMC transmission in one session and then reassembled it in a second session while explaining what he does when rebuilding one and why he does it.
In order to show the audience an up-close view of what Manny was doing, we used a camera, some light in tight places, and a projector and we recorded what we were showing on the screen along with audio good enough to hear what Manny and even audience members were saying. I have had a couple of fellow GMCers review the 2.5-hour recording and they agree that the quality of the picture and sound are good and it is almost as good as being there with the Manny Tranny master himself. The video is 2 ½ hours long.
The price of the video is $10 including mailing which will be donated to GMCWS (minus the $1 - $2 cost). You can send me a check or a PayPal donation (so no fees).
Armand Minnie
armand@minniebiz.com
13533 N Buckhorn Cholla Drive
Marana, AZ 85658
Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org
|
|
|
Re: Watch Manny reassemble a GMC transmission on a new video now available [message #295605 is a reply to message #295597] |
Tue, 16 February 2016 11:13 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
This video has some excellent information on it and I would encourage anyone who is even mildly interested to pick one up and watch it. I'm also hoping the Western States group will continue to make these types of things available to the GMC community at large. While not a very good substitute for actually being at a rally, this kind of info can be very helpful for those who can't make it for whatever reason.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
Re: Watch Manny reassemble a GMC transmission on a new video now available [message #295622 is a reply to message #295597] |
Tue, 16 February 2016 17:51 |
|
Matt Colie
Messages: 8547 Registered: March 2007 Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Armand,
It only make a little difference to be (like between really want it and gotta have it), but is it both days (tear down - too) or just the build day?
You should bring a few to Dothan and Branson and Mansfield (and.....)
Matt
armandminnie wrote on Tue, 16 February 2016 11:07At the Fall 2015 GMCWS rally in Pueblo, Manny Trovao disassembled a GMC transmission in one session and then reassembled it in a second session while explaining what he does when rebuilding one and why he does it.
In order to show the audience an up-close view of what Manny was doing, we used a camera, some light in tight places, and a projector and we recorded what we were showing on the screen along with audio good enough to hear what Manny and even audience members were saying. I have had a couple of fellow GMCers review the 2.5-hour recording and they agree that the quality of the picture and sound are good and it is almost as good as being there with the Manny Tranny master himself. The video is 2 ½ hours long.
The price of the video is $10 including mailing which will be donated to GMCWS (minus the $1 - $2 cost). You can send me a check or a PayPal donation (so no fees).
Armand Minnie
armand@minniebiz.com
13533 N Buckhorn Cholla Drive
Marana, AZ 85658
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|