GMCforum: GMCnet » Onan Exhaust issue

Home » Public Forums » GMCnet » Onan Exhaust issue (Onan Exhaust issue)

Show: Today's Messages :: Polls :: Message Navigator

Onan Exhaust issue [message #295596]

Tue, 16 February 2016 09:34

jknezek

Messages: 1057
Registered: December 2007

Karma:

Senior Member

So before our trip I fired up the Onan for its weekly exercise. I heard a horrible clinking noise and went to check on the problem. Found the exhaust bracket was loose to the point of falling off. I tightened up the exhaust bracket, assuming the problem was solved, fired up the generator, and heard an incredible roar. I know Onans are loud, but this was ridiculous. Pulled it back out of its home and immediately saw the problem.

The exhaust had come loose from the manifold. It appears the flange that goes into the manifold simply rotted, rusted, and vibrated apart, probably not helped by the loose bracket. Any thoughts on how to fix this problem? I'm wondering if I should just up and buy a new exhaust for the Onan as otherwise it is running great, but I guess I need to find someone to do the work.

Thanks,
Jeremy Knezek
1976 Glenbrook
Birmingham, AL

Report message to a moderator

[Message index]

		Onan Exhaust issue By: jknezek on Tue, 16 February 2016 09:34
		Re: Onan Exhaust issue By: Dennis S on Tue, 16 February 2016 12:39
		Re: Onan Exhaust issue By: jknezek on Tue, 16 February 2016 12:45
		Re: Onan Exhaust issue By: jknezek on Tue, 16 February 2016 14:12
		Re: Onan Exhaust issue By: JohnL455 on Wed, 17 February 2016 09:14
		Re: [GMCnet] Onan Exhaust issue By: jimk on Wed, 17 February 2016 12:08
		Re: Onan Exhaust issue By: Ken Burton on Wed, 17 February 2016 20:01
		Re: [GMCnet] Onan Exhaust issue By: jimk on Wed, 17 February 2016 21:00

Previous Topic:	Re: [GMCnet] Body Side Moldings- Replacement
Next Topic:	GMC Driving fundamentals question

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 17 14:57:45 CST 2024

Total time taken to generate the page: 0.00750 seconds