Home » Public Forums » GMCnet » Setting the front ride height procedure
Re: [GMCnet] Setting the front ride height procedure [message #294020 is a reply to message #294019] |
Mon, 18 January 2016 10:53 |
James Hupy
Messages: 6806 Registered: May 2010
Karma:
|
Senior Member |
|
|
Camber too.
Jim Hupy
Salem, Or
78 GMC ROYALE 403
On Jan 18, 2016 8:46 AM, "Bob de Kruyff" wrote:
> Scott Nutter wrote on Mon, 18 January 2016 00:19
>> *********UPDATE***********
>>
>> First of all, mine was a real pain in the rear.........
>> The PO used a real good thread locker on the pork chop set bolt. It took
> what seemed like all day to get them out. And that was with a 1/2" drive
>> breaker bar.......It actually required twice as much force to remove the
> set bolts than it did to compress the pork chop with the unloader tool...
>> After taking the bolts to the wire wheel for cleaning, I coated them
> with anti seize. They went back in with no problem.
>>
>> Since this was my first time to set the ride height, I erred on the
> cautious side and lifted the front end till the wheels were off the ground
>> before I compresses the pork chop with the unloader tool. All went
> according to plan with no hiccups. I ran out of time, so no test drive to
> allow
>> the front end to set in. Hopefully that will be in the next few days.
>>
>> I have a friend who has extreme duty Kent Moore torsion bar unloader
> tool. When I get a chance to fine tune the front end height, I am going to
>> use that unloader tool and attempt to set the height WITHOUT raising the
> front wheels off the ground. I just don't know how I'm going to fit under
>> the coach without the front end jacked up.......I will post results when
> finished....Scott out..
>
> Scott--don't forget to check the front toe setting. Depending on how much
> you raised the coach, the toe will change a lot.
> --
> Bob de Kruyff
> 78 Eleganza
> Chandler, AZ
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
Setting the front ride height procedure
|
|
|
Re: Setting the front ride height procedure
By: Harry on Wed, 23 December 2015 15:18
|
|
|
Re: [GMCnet] Setting the front ride height procedure
By: jimk on Wed, 23 December 2015 15:28
|
|
|
Re: [GMCnet] Setting the front ride height procedure
By: Harry on Wed, 23 December 2015 15:46
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
By: USAussie on Thu, 24 December 2015 16:18
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
By: Larry on Thu, 24 December 2015 13:54
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
By: USAussie on Mon, 18 January 2016 17:44
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
By: USAussie on Mon, 18 January 2016 19:34
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
By: USAussie on Mon, 18 January 2016 22:51
|
|
|
Re: Setting the front ride height procedure
|
|
|
Re: Setting the front ride height procedure
|
|
|
Re: Setting the front ride height procedure
By: Larry on Wed, 23 December 2015 17:32
|
|
|
Re: Setting the front ride height procedure
|
|
|
Re: Setting the front ride height procedure
|
|
|
Re: Setting the front ride height procedure
By: Larry on Wed, 23 December 2015 19:20
|
|
|
Re: Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: [GMCnet] Setting the front ride height procedure
|
|
|
Re: Setting the front ride height procedure
By: JohnL455 on Mon, 18 January 2016 17:56
|
Goto Forum:
Current Time: Fri Sep 27 13:47:58 CDT 2024
Total time taken to generate the page: 0.00957 seconds
|