GMCforum: GMCnet » Onan Fuel Pump Assistance Requested

Home » Public Forums » GMCnet » Onan Fuel Pump Assistance Requested (In Need Of Small Part)

Show: Today's Messages :: Polls :: Message Navigator

Onan Fuel Pump Assistance Requested [message #293736]

Mon, 11 January 2016 17:06

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

I am trying to keep the Onan original, and the fuel pump out of the landfill.

Terry Taylor took a shot at 3d printing the nylon Spring Cup Valve but I couldn't measure the dimensions close enough and the printed part won't work.

If anyone has rat holed an old Onan fuel pump in the hopes that some day it might come in handy, this might be it. I can buy the cover gasket online, but nobody has the Spring Cup and Valve. I don't need the whole pump, but if it saves the hassle of dismantling it, I will gladly take the whole thing. If it is already apart, I need the parts shown here:

http://www.gmcmhphotos.com/photos/data/10/Onan_Fuel_Pump_Parts_Needed.jpg

At the very least, I would like the Spring Cup and Valve. No heroic measures and not worth a lot of dollars to me. I do have a backup plan.

Report message to a moderator

Re: [GMCnet] Onan Fuel Pump Assistance Requested [message #293737 is a reply to message #293736]

Mon, 11 January 2016 17:16

Terry Taylor

Messages: 113
Registered: October 2004
Location: San Lorenzo, CA

Karma: 0

Senior Member

Take a look at the 3D PDF I just sent you.

On 1/11/2016 3:06 PM, A. wrote:
> Terry Taylor took a shot at 3d printing the nylon Spring Cup Valve but I couldn't measure the dimensions close enough and the printed part won't
> work.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator