GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Setting the front ride height procedure
Re: Setting the front ride height procedure [message #292820 is a reply to message #292808] Wed, 23 December 2015 16:54 Go to previous messageGo to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma:
Senior Member
Harry -
If you don't unload the pressure on the adjustment screws for the torsion bars, you will almost certainly strip them - they'll hold the bars in place but they aren't intended to move them. Buy, beg, borrow, steal, or fabricate an unloader if you're going to play with the front ride height.

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

[Updated on: Wed, 23 December 2015 16:54]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Off Topic: Owner's Manual for 2003-2009 GMC Topkick / Chevy Kodiak
Next Topic: [GMCnet] Restoration, Pictures of burned GMC good b
Goto Forum:
  


Current Time: Mon Jun 17 11:53:44 CDT 2024

Total time taken to generate the page: 0.00783 seconds