GMCforum: GMCnet » oddball tool search: 1-5/8 in. step bit

Home » Public Forums » GMCnet » oddball tool search: 1-5/8 in. step bit

Show: Today's Messages :: Polls :: Message Navigator

oddball tool search: 1-5/8 in. step bit [message #292611]

Mon, 21 December 2015 10:10

rcjordan

Messages: 1913
Registered: October 2012
Location: Elizabeth City, North Car...

Karma: 1

Senior Member

a.k.a. "unibit"

I have several of these up to 1-3/8. I'd like a 1-5/8" if they make it. I find these are particularly good for working with plastics. (Hole saws work, but just not as well.)

SOLD 77 Royale Coachmen Side Dry Bath
76 Birchaven Coachmen Side Wet Bath
76 Eleganza
Elizabeth City, NC

Report message to a moderator

Re: oddball tool search: 1-5/8 in. step bit [message #292612 is a reply to message #292611]

Mon, 21 December 2015 10:17

rcjordan

Messages: 1913
Registered: October 2012
Location: Elizabeth City, North Car...

Karma: 1

Senior Member

update:
And a 1/2" shank would be max.
Found this one, but the drill starts at 1-5/8 with a flat end. I need some sort of taper to start/center the bore.

http://www.amazon.com/Hall-Tools-IPSD1619-Powerbor-Diameter/dp/B00MCF1N7U/

SOLD 77 Royale Coachmen Side Dry Bath
76 Birchaven Coachmen Side Wet Bath
76 Eleganza
Elizabeth City, NC

Report message to a moderator

Previous Topic:	GMC MOTORHOME POWER LOSS PROBLEM
Next Topic:	[GMCnet] New style Refrigerator roof vent cover.

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 18:49:17 CDT 2024

Total time taken to generate the page: 0.02422 seconds