GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Removing subflooring
Removing subflooring [message #290783] Mon, 23 November 2015 11:50 Go to next message
davidlive is currently offline  davidlive   United States
Messages: 143
Registered: November 2011
Location: Simi valley, Southern Cal...
Karma: -1
Senior Member
While i've been removing the subflooring alot that is just rotted out by mistake cut right though a brake line hidden between the frame rails and flooring between the rear wheels, in my 74 i noticed some of the panels are bolted to the frame, if i remove those will the body be loose on the frame ? is there other things securing the body to the frame ? also did it change on later years ?


Thanks David


78 Royal #749
74 #136
Oversteer is when you hit the wall with the rear of the car, understeer is when you hit the wall with the front of the car. Hp is how fast you hit the wall, and torque is how far you take the wall with you when you hit it.
Re: [GMCnet] Removing subflooring [message #290784 is a reply to message #290783] Mon, 23 November 2015 11:58 Go to previous message
Dolph Santorine is currently offline  Dolph Santorine   United States
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
Senior Member
David:

You can remove the two brackets without worrying about it.

You’ll need to put them back in, and I recommend that you use the piece you removed as a template.

Now is probably a good time to go to a stainless line set.

Dolph

DE N8JPC AG

Wheeling, West Virginia

1977 26’ ex-PalmBeach
1-Ton, Sullybilt Bags, Reaction Arms, 3.70 LSD, Manny Transmission, EV-6010

“The Aluminum and Fiberglass Mistress"





> On Nov 23, 2015, at 12:50 PM, David Morrison wrote:
>
> While i've been removing the subflooring alot that is just rotted out by mistake cut right though a brake line hidden between the frame rails and
> flooring between the rear wheels, in my 74 i noticed some of the panels are bolted to the frame, if i remove those will the body be loose on the frame
> ? is there other things securing the body to the frame ? also did it change on later years ?
>
>
> Thanks David
> --
> 1974 -G-M-C- Painted Desert Named "Firebird"
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Previous Topic: [GMCnet] Battery Boost Switch
Next Topic: [GMCnet] V-Belts
Goto Forum:
  


Current Time: Tue Nov 19 23:33:01 CST 2024

Total time taken to generate the page: 0.01306 seconds