| [GMCnet] Bolting Down Seat Bases [message #290253] |
Thu, 12 November 2015 06:19  |
Mark Kasiewicz
Messages: 14
Registered: June 2014
Karma:
|
Junior Member |
|
|
Hi and welcome.
After removing my fender liners I am able to reach every bolt and nut
through either the engine hatch or front fender wells. It is good to have a
helper on the inside to hold the bolts from turning. Good luck with the
leaks and the floor. I have replaced the rear I/2 of the coach floor.
Luckily for me the cockpit floor was still sound. I coated each new sheet
of flooring with Marine Varnish and sealed edges with epoxy sealer
Mark Kasiewicz
77 Kingsley "Gus da Bus" (currently installing new furnace and repairing
cabinets)
Eau Claire , WI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
