GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] FW: The Restoration. If you could add more 12/110 volt. Where would it be?
[GMCnet] FW: The Restoration. If you could add more 12/110 volt. Where would it be? [message #289132] Wed, 21 October 2015 21:21 Go to next message
BobDunahugh is currently offline  BobDunahugh   United States
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
Senior Member






Jon. I'll need to get a couple of those USB ports. I'm taking the walls out now. And need to make a diagram of all the existing wiring. Then figure out what needs to go. All cabinets are out except the rear bath. Had a nice day. So I cleaned, sanded, and put a Urethane finish on all inter, an outer wood areas as to seal up any remaining orders that might come back. That solid walnut came out great. Like to get the wood floor painted with a Porch/floor paint Friday. As an FYI. Mr Clean's Anti Bacteria cleaner has done a great job of cleaning, and removing the mouse smell..
Bob Dunahugh78 Royale



_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] FW: The Restoration. If you could add more 12/110 volt. Where would it be? [message #289134 is a reply to message #289132] Wed, 21 October 2015 22:20 Go to previous message
emerystora is currently offline  emerystora   United States
Messages: 4442
Registered: January 2004
Karma: 13
Senior Member
Bob
You should probably put a coat of Kilz primer on the floor. This is used on house floors beneath carpet to seal in odors from pet urine. It should work well for mouse urine soaked into the floors and wood beneath cabinets. You can buy it at Home Depot or Lowes.

EmeryStora

> On Oct 21, 2015, at 8:21 PM, Bob Dunahugh wrote:
>
>
>
>
>
>
>
> Jon. I'll need to get a couple of those USB ports. I'm taking the walls out now. And need to make a diagram of all the existing wiring. Then figure out what needs to go. All cabinets are out except the rear bath. Had a nice day. So I cleaned, sanded, and put a Urethane finish on all inter, an outer wood areas as to seal up any remaining orders that might come back. That solid walnut came out great. Like to get the wood floor painted with a Porch/floor paint Friday. As an FYI. Mr Clean's Anti Bacteria cleaner has done a great job of cleaning, and removing the mouse smell..
> Bob Dunahugh78 Royale
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Previous Topic: [GMCnet] Instrumentation Source
Next Topic: Article on Dexcool in older engines
Goto Forum:
  


Current Time: Sun Oct 06 15:28:56 CDT 2024

Total time taken to generate the page: 0.01050 seconds