Re: New Cult Member - Johnny B, we have sister coaches [message #288942 is a reply to message #288940] |
Sun, 18 October 2015 10:00 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to previous message](/GMCforum/theme/default/images/down.png) |
tphipps
![United States United States](/GMCforum/images/flags/us.png) Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma:
|
Senior Member |
|
|
You do not have to remove the windshield to get to the back of the dash panel wiring. The backside plastic panel has two Phillips head screw in their respective corners. The one on the left side will require a very short Phillips head to remove. After you have taken out the screws, the panel should lift up about 1 inch, then you can carefully slide it out. The panel has a lip on it that will give you fits, if it is intact. I think most people have trimmed the upper left hand corner of the lip down for easier removal of the panel.
Makes the wiring easier to get to. Notice that I said easier, not easy. Still a hassle.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|