| [GMCnet] Honda Seat Help! [message #288912] |
Sat, 17 October 2015 15:54  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
|
Senior Member |
|
|
At Rapid City I got a bargain on a pair of Honda seats. Today I
decided it was time to try mounting them on the electric bases I've
had under the current seats for 17 years. Removing the passenger seat
proved to be a challenge -- I had to pull some tricks when I installed
them. Even had to resort to a nut cracker on one of the 8 bolts.
The next challenge was removing the base from the Honda seat. I
couldn't figure out how to remove the plastic trim without damaging
it, so removing the 6 nuts was a 5* at a time process. The base is
now separated from the seat, but I can't figure out how to remove the
4 cables which control the floor latches and operate the manual slide
locks. Certainly I can cut them, but I'm reluctant to do that -- it
could turn out that someone else winds up with these seats and wants
those feature.
Has anyone figured a way out of that dilemma? If I could just
disconnect the cables from the latches, the rest would be easy, but I
can't figure how to do that.
How about removing the plastic trim -- is that possible without damage?
Ken H.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
