GMC castor dolly [message #288810] |
Thu, 15 October 2015 11:07 |
sgltrac86
Messages: 49 Registered: April 2011 Location: BELLEVUE WA
Karma: 0
|
Member |
|
|
I am cleaning up the mudda in my shop and have decided to sell a castor dolly apparatus I built to support and move The Pig during its restoration. It is constructed from 1/4" steel plate and tube and 4 3000lb castors. On a smooth concrete floor a fully assembled Gmc can be lifted and fastened onto the castors and moved around the shop. The front stub frame can be removed completely loaded with engine/ trans and cooling on this dolly. The apparatus is located in Seattle and I would like $500 for it. The castors alone cost more than that. I think I posted a link to the photos below but if not look in my album on the photo site under Todd Sullivan
http://www.gmcmhphotos.com/photos/g6037-77-royale.html
Sully
77 Eleganza 2 ( Recherché )
Seattle, wa
|
|
|
Re: GMC castor dolly [message #288811 is a reply to message #288810] |
Thu, 15 October 2015 11:09 |
sgltrac86
Messages: 49 Registered: April 2011 Location: BELLEVUE WA
Karma: 0
|
Member |
|
|
and if anyone is computer savvy enough to cross post this to the facebook page or is willing to explain to me how to do it I would be most appreciative.
Sully
77 Eleganza 2 ( Recherché )
Seattle, wa
|
|
|
Re: GMC castor dolly [message #288818 is a reply to message #288811] |
Thu, 15 October 2015 15:31 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Heighlight in blue, copy and paste..... Done
sgltrac86 wrote on Thu, 15 October 2015 12:09and if anyone is computer savvy enough to cross post this to the facebook page or is willing to explain to me how to do it I would be most appreciative.
C. Boyd
76 Crestmont
East Tennessee
[Updated on: Thu, 15 October 2015 15:37] Report message to a moderator
|
|
|