Re: Carb / Vacuum issue [message #288650 is a reply to message #288553] |
Tue, 13 October 2015 14:07 |
bpimm
Messages: 211 Registered: June 2013 Location: Washougal Washington
Karma:
|
Senior Member |
|
|
Ok some success, I drilled the holes into the throttle plates and reassembled the carb. after reaching operating temp I readjusted everything and I have no primary dribble at idle and some adjustment with the idle screws so I think this must have been a carb from a smaller engine and needed to much air for the solid throttle plates. Now I'm just rich everywhere but idle.
Is there a list of the jets and rods that came in the correct carbs? I thought I had seen one but I can't locate it now.
Thanks
Brian & RaeDean
1973 26' #383
Washougal WA
|
|
|