Re: Carb / Vacuum issue [message #288562 is a reply to message #288559] |
Mon, 12 October 2015 11:27 |
Bullitthead
Messages: 1411 Registered: November 2013
Karma:
|
Senior Member |
|
|
Sorry, brain fog...the quad on the boat did this once after it was rebuilt...the cam that moves the primary metering rods was not being allowed to settle all the way down because the screw that holds the rod bracket was too long. I guess there was another one nearby when he rebuilt that carb, I could not find one that got swapped. So I ground (actually used a file and vice grips, at the dock)the screw a little shorter so it allowed the rods to settle completely and problem solved.
Terry Kelpien
ASE Master Technician
73 Glacier 260
Smithfield, Va.
|
|
|