GMCforum: GMCnet » Any leads on a 78 Royale center kitchen

Home » Public Forums » GMCnet » Any leads on a 78 Royale center kitchen

Show: Today's Messages :: Polls :: Message Navigator

Any leads on a 78 Royale center kitchen [message #284523]

Mon, 10 August 2015 18:04

Scott Nutter

Messages: 782
Registered: January 2015
Location: Houston/San Diego

Karma:

Senior Member

Would anyone here know of anyone selling a 1978 Royale center kitchen in great condition? Original or restored condition would be fine. Thanks.

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas

Report message to a moderator

[Message index]

		Any leads on a 78 Royale center kitchen By: Scott Nutter on Mon, 10 August 2015 18:04
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Mon, 10 August 2015 21:35
		Re: Any leads on a 78 Royale center kitchen By: Dennis S on Mon, 10 August 2015 21:59
		Re: Any leads on a 78 Royale center kitchen By: A Hamilto on Mon, 10 August 2015 23:44
		Re: Any leads on a 78 Royale center kitchen By: Steve on Tue, 11 August 2015 08:00
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Tue, 11 August 2015 09:53
		Re: Any leads on a 78 Royale center kitchen By: Smitty52 on Wed, 12 August 2015 11:06
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Wed, 12 August 2015 12:03
		Re: Any leads on a 78 Royale center kitchen By: Smitty52 on Wed, 12 August 2015 14:00
		Re: Any leads on a 78 Royale center kitchen By: habbyguy on Wed, 12 August 2015 17:08
		Re: Any leads on a 78 Royale center kitchen By: Scott Nutter on Thu, 13 August 2015 21:19
		Re: Any leads on a 78 Royale center kitchen By: John Biwersi on Tue, 11 August 2015 19:14
		Re: Any leads on a 78 Royale center kitchen By: thesmith on Wed, 12 August 2015 08:14

Previous Topic:	Skylight in dry bath?
Next Topic:	[GMCnet] Nuts for the cupboard bolts metal or aluminum?

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Jun 15 20:16:52 CDT 2024

Total time taken to generate the page: 0.00810 seconds