GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Fuel fill angle works good
Fuel fill angle works good [message #283675] Sat, 01 August 2015 16:29 Go to next message
bpimm is currently offline  bpimm   
Messages: 211
Registered: June 2013
Location: Washougal Washington
Karma: 2
Senior Member
My new fuel fill at a 20 degree angle seems to work well, have filled twice with 2 different nozzles and they both clear and seal good.

http://i101.photobucket.com/albums/m57/bdpimm/1973%20GMC%20Motor%20home/20150724_120057.jpg

Brian & RaeDean 1973 26' #383 Washougal WA

Report message to a moderator

Re: Fuel fill angle works good [message #283720 is a reply to message #283675] Sun, 02 August 2015 10:57 Go to previous messageGo to next message
armandminnie is currently offline  armandminnie   United States
Messages: 864
Registered: May 2009
Location: Marana, AZ
Karma: 2
Senior Member
What did you do to change the angle?

Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org

Report message to a moderator

Re: Fuel fill angle works good [message #283723 is a reply to message #283675] Sun, 02 August 2015 11:29 Go to previous messageGo to next message
bpimm is currently offline  bpimm   United States
Messages: 211
Registered: June 2013
Location: Washougal Washington
Karma: 2
Senior Member
It's covered in this thread.

http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=282171&rid=3692#msg_282171

Brian & RaeDean 1973 26' #383 Washougal WA

Report message to a moderator

Re: Fuel fill angle works good [message #283777 is a reply to message #283675] Sun, 02 August 2015 19:11 Go to previous messageGo to next message
Jp Benson is currently offline  Jp Benson   United States
Messages: 649
Registered: October 2011
Location: Fla
Karma: 2
Senior Member
It looks nice too.

JP

Report message to a moderator

Re: Fuel fill angle works good [message #283838 is a reply to message #283675] Mon, 03 August 2015 13:18 Go to previous message
djeffers is currently offline  djeffers   United States
Messages: 219
Registered: June 2004
Karma: 2
Senior Member
bpimm wrote on Sat, 01 August 2015 17:29
My new fuel fill at a 20 degree angle seems to work well, have filled twice with 2 different nozzles and they both clear and seal good.

http://i101.photobucket.com/albums/m57/bdpimm/1973%20GMC%20Motor%20home/20150724_120057.jpg


Hello Brian,

PM sent.

We like your 20 degree angle solution. Had been considering using marine filler necks, but using the original GMC part is much better.

I couldn't quite tell, what size tubing did you use? Is it slipped inside the GMC filler pipe? Did you weld, solder or otherwise secure the 20 degree tube to the GMC filler?

Thanks for the post.

Regards,

Don and Susan Jeffers
78 Eleganza II

Report message to a moderator

Previous Topic: [GMCnet] Removal of left over from the ceiling
Next Topic: Final Drive Install Question
Goto Forum:
  


Current Time: Sat Nov 16 12:21:36 CST 2024

Total time taken to generate the page: 0.00903 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software