|
Re: [GMCnet] changing out the ignition switch [message #281619 is a reply to message #281617] |
Tue, 07 July 2015 07:46 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
http://www.gmcmhphotos.com/photos/s-10-steering-wheel-caddy-conversion/p48874-ignition-switch.html
The ignition switch is on the lower part of the steering column and held on with two screws and is adjustable. Sometimes the switch will wear out of adjustment. Try loosening the screws a little and slide the switch a little and see if it will engage. The lowest switch is the neutral safety / back up light switch and needs to be adjusted also, I usually put selector in reverse and adjust the safety switch to where the back up lights are on then tighten. Both switches can be replaced with column in coach, just got to stand on your head.
mjbourgon wrote on Tue, 07 July 2015 08:17Good morning all
My friend and fellow gmc owner has to replace the ignition switch in his
coach. What is the easiest way to do this, and are there adjustments I
need to watch out for.
Thanks
Marcel in Santa Teresa, N.M.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
|