GMCforum: GMCnet » Re: [GMCnet] anti-drain back in oil filter

Home » Public Forums » GMCnet » Re: [GMCnet] anti-drain back in oil filter

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] anti-drain back in oil filter [message #281502]

Sun, 05 July 2015 12:34

Tom Whitton

Messages: 235
Registered: February 2004
Location: Paducah, KY

Karma:

Senior Member

Is there any advantage or disadvantage to an anti-drain back valve in an oil filter?

WIX 51258 has an anti-drain back valve

WIX 51049 does not have an anti-drain back valve

WIX 51049 is .84" higher than WIX 51258.

Other dimensions are the same. Both filter to 21 microns and both fit the 455 engine.

Tom Whitton
Paducah, KY
26 foot updated GMC

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		Re: [GMCnet] anti-drain back in oil filter By: Tom Whitton on Sun, 05 July 2015 12:34
		Re: [GMCnet] anti-drain back in oil filter By: Kosier on Sun, 05 July 2015 12:57
		Re: [GMCnet] anti-drain back in oil filter By: JohnL455 on Sun, 05 July 2015 15:44
		Re: [GMCnet] anti-drain back in oil filter By: USAussie on Sun, 05 July 2015 15:43
		Re: [GMCnet] anti-drain back in oil filter By: JohnL455 on Sun, 05 July 2015 18:29
		Re: [GMCnet] anti-drain back in oil filter By: Tom Whitton on Mon, 06 July 2015 10:15
		Re: [GMCnet] anti-drain back in oil filter By: USAussie on Mon, 06 July 2015 17:47
		Re: [GMCnet] anti-drain back in oil filter By: jhbridges on Mon, 06 July 2015 11:16

Previous Topic:	Looking for a good 403 manifold
Next Topic:	[GMCnet] Source for plumbing

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 18:28:01 CDT 2024

Total time taken to generate the page: 0.00620 seconds