GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Gosh I feel stupid...
Gosh I feel stupid... [message #281127] Tue, 30 June 2015 19:49 Go to previous message
kerry pinkerton is currently offline  kerry pinkerton   United States
Messages: 2565
Registered: July 2012
Location: Harvest, Al
Karma:
Senior Member
This week, I've FINALLY finished some other non-GMC projects and am able to put the head back on the 403. For those who don't remember, back in April, I found a dead cylinder and pulled the head just before the Patterson LA GMCMI rally.

The head and intake manifold went back on easily enough, my son helped me place them smoothly. Today, I was putting everything back together and put on the big bracket that goes across the right valve cover and ties to the AC compressor with a long 3/8 bolt.

http://www.gmcmhphotos.com/photos/ac-bracket-fix/p48720-v-001.html

http://www.gmcmhphotos.com/photos/data/6356/V_001.jpg

This is the way it's supposed to fit together.

http://www.gmcmhphotos.com/photos/ac-bracket-fix/p48722-v-003.html

http://www.gmcmhphotos.com/photos/data/6356/V_003.jpg

The long 3/8 bolt should slip through both brackets but today it just would NOT go. I pulled and pushed and cussed...nothing. It just wasn't lining up. I loosened all the bolts and nuts...nothing. After about 45 minutes I decided to take everything apart. Oh crap! There was a lock washer UNDER the bracket on the stud on the outside of the right side head. It's hard to see due to the position and I pulled the nut off and just didn't notice the lock washer and put the bracket right on top of it. DUH! Embarassed

Five minutes later it was on and tight. Embarassed Shocked

Kerry Pinkerton - North Alabama Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Previous Topic: Dave Lenzi update
Next Topic: Kickdown on the transmission
Goto Forum:
  


Current Time: Mon Nov 11 20:22:12 CST 2024

Total time taken to generate the page: 0.00755 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software