Re: fridge install [message #280571 is a reply to message #280479] |
Tue, 23 June 2015 12:27 |
lqqkatjon
Messages: 2324 Registered: October 2010 Location: St. Cloud, MN
Karma:
|
Senior Member |
|
|
So in a quest to Install my fridge properly, I have learned a couple things, and i have not even started.
1st off I am dealing with a dometic rm2652.
an owners/install manual can be found here:
http://bryantrv.com/docs2/docs/operating/2652operation.pdf
it gives some good information, but it turns out it is also missing some information. It talks about minimum clearances, but does not tell you what maximum clearances, and other installation criteria you should and could need.
so I then found this manual:
http://www.dometic.com/QBank/EPiServer/Dometic/US/Manuals/RV-manuals/Refrigerators/Americana-Americana-Plus-service-manual_17606.pdf
more information and it does give some more clearance information about the maximum, and installing some baffles.
then I received an email from a fellow GMCer, and pointed me to this manual:
http://www.dometic.com/QBankFiles3/EPiServer/Dometic/US/Manuals/RV-manuals/Refrigerators/Installation-Instructions-All-Refrigerator-Models_3313238.036 _17707.pdf
it is this final manual, that finally gives all the information needed for a proper dometic rm2652 fridge.
I am obviously not worried about a factory warranty on my used dometic, but It is nice to know what the installation exact methods should be in hopes that it works at max efficiency and safety.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|