Re: fridge install [message #280500 is a reply to message #280479] |
Mon, 22 June 2015 15:08 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma:
|
Senior Member |
|
|
Jon,
I didn't go back and include this in my fridge installation album, but about a year later, I ended up pulling it back out and adding some 3/4" X 3/4" pieces to the front face of the opening. It just made the installation cleaner than trying to shoehorn the slightly taller refrigerator under the top piece of trim and also gave it slightly more clearance in the back. You DO want a baffle up close to the coils in the back to direct the maximum airflow over the coils. If you haven't already done so, you might want to look up the installation instructions for your particular unit on line. I know Norcold has theirs available, I would guess Dometic does too.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|