GMCforum: GMCnet » [GMCnet] Pulling a engine out of a GMC

Home » Public Forums » GMCnet » [GMCnet] Pulling a engine out of a GMC

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Pulling a engine out of a GMC [message #278820]

Mon, 01 June 2015 09:43

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

I'm trying to explain to John how to pull the engine out of the GMC he, and Teresa got from Glenn, and BJ. Is there a video or photo's out there that he could look at? It's starting to look like the drive to the HV pump broke. Or the HV pump's relief valve failed. As the engine only had about 8,000 miles on it. Glenn was a careful driver.
thanks
Bob Dunahugh Member GMCMI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Pulling a engine out of a GMC [message #278824 is a reply to message #278820]

Mon, 01 June 2015 10:36

wally

Messages: 643
Registered: August 2004
Location: Omaha Nebraska

Karma: 5

Senior Member

BobDunahugh wrote on Mon, 01 June 2015 09:43

I'm trying to explain to John how to pull the engine out of the GMC he, and Teresa got from Glenn, and BJ. Is there a video or photo's out there that he could look at? It's starting to look like the drive to the HV pump broke. Or the HV pump's relief valve failed. As the engine only had about 8,000 miles on it. Glenn was a careful driver.
thanks
Bob Dunahugh Member GMCMI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Gene Fisher has this
http://gmcmotorhome.info/engine.html#REMOVE

Wally Anderson
Omaha NE
75 Glenbrook

Report message to a moderator

Re: [GMCnet] Pulling a engine out of a GMC [message #278886 is a reply to message #278820]

Mon, 01 June 2015 22:37

Galen

Messages: 146
Registered: November 2011
Location: New Virginia, IA

Karma: 0

Senior Member

http://www.gmcmhphotos.com/photos/search.php?searchid=115197

Try this link, or go to the photo site and search "engine removal". There's photos of out the top and out the bottom.

Good detail here
http://www.gmcmhphotos.com/photos/member-galleries/p28249-engine-hoist-material-list.html

And another great one
http://www.gmcmhphotos.com/photos/engine-out-the-top/p21029-pulling-engine-out-the-top.html

Galen Briggs New Virginia, Iowa 1978 Palm Beach

[Updated on: Mon, 01 June 2015 22:41]

Report message to a moderator

Previous Topic:	[GMCnet] Wifi repeater
Next Topic:	Electrical connectors and wiring channel covers

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 17:25:30 CST 2024

Total time taken to generate the page: 0.00974 seconds