GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Clearance Light screw anchor removal (How do I remove them?)
Clearance Light screw anchor removal [message #278359] Mon, 25 May 2015 10:09 Go to previous message
George B. is currently offline  George B.   United States
Messages: 213
Registered: February 2012
Karma:
Senior Member
Replacing my clearance lights with new LED ones. Problem: About half the old mounting screws sheared off in the original anchors. Before I dive in and mess up my roof wondering if anyone has a suggestion on how to remove the old anchors? I can't get to the underside very easy because there is a cabinet installed across the back above the rear window. Will use new well nuts to reinstall the new lights.
http://www.gmcmhphotos.com/photos/george-b/p58020-clearance-light-anchors.html

George Butts Las Vegas Nevada 73 "Custom 26' Q" & 76 23' Birchaven 71 Honda 600 Coupe & 01 Tracker Toads

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] 4500 GMC pictures
Next Topic: [GMCnet] Oil pressure problem
Goto Forum:
  


Current Time: Wed Nov 20 11:25:27 CST 2024

Total time taken to generate the page: 0.00623 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software