GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Brake bleeding (Tom Whitton)
Re: [GMCnet] Brake bleeding (Tom Whitton) [message #278179] Thu, 21 May 2015 21:58 Go to next message
Tom Whitton   United States
Messages: 235
Registered: February 2004
Location: Paducah, KY
Karma: 0
Senior Member
Thank you, Hal, I have an excellent pressure bleeder but want to know what size block is recommended when bleeding the brakes without a pressure bleeder.

For a pressure bleeder check with Jim Hupy. He makes a very nice one.
Hal Kading &* Buskirk Las Cruces NM

When bleeding the brakes the old way, without a pressure bleeder, I understand it is best to put a block of wood under the pedal so you won't push down too far and damage a seal in the master cylinder. I believe Emery posted something about this several years ago. What size block of wood should be used (2 X 4, 1 X 2, etc.)? You guys can probably guess why I'm asking. Appreciate your answers.

All the best,

Tom Whitton
26 foot updated GMC
Paducah, KY
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Brake bleeding (Tom Whitton) [message #278190 is a reply to message #278179] Fri, 22 May 2015 07:52 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
Read here
http://gmcmotorhome.info/brakes.html#press


On Thursday, May 21, 2015, Tom Whitton wrote:

> Thank you, Hal, I have an excellent pressure bleeder but want to know what
> size block is recommended when bleeding the brakes without a pressure
> bleeder.
>
> For a pressure bleeder check with Jim Hupy. He makes a very nice one.
> Hal Kading &* Buskirk Las Cruces NM
>
> When bleeding the brakes the old way, without a pressure bleeder, I
> understand it is best to put a block of wood under the pedal so you won't
> push down too far and damage a seal in the master cylinder. I believe Emery
> posted something about this several years ago. What size block of wood
> should be used (2 X 4, 1 X 2, etc.)? You guys can probably guess why I'm
> asking. Appreciate your answers.
>
> All the best,
>
> Tom Whitton
> 26 foot updated GMC
> Paducah, KY
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>


--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Re: [GMCnet] Brake bleeding (Tom Whitton) [message #278201 is a reply to message #278190] Fri, 22 May 2015 13:41 Go to previous message
hal kading is currently offline  hal kading   United States
Messages: 642
Registered: February 2004
Location: Las Cruces NM
Karma: 4
Senior Member
Tom,

Size the block so that the pedal stops at or a little before where it normally stops.

Hal Kading 78 Buskirk Las Cruces NM


Hal Kading 1978 Buskirk Stretch 502 Las Cruces NM
Previous Topic: [GMCnet] brake bleeding
Next Topic: Onan Front Seal
Goto Forum:
  


Current Time: Wed Oct 02 09:18:35 CDT 2024

Total time taken to generate the page: 0.00946 seconds