window felt [message #277866] |
Fri, 15 May 2015 11:22 |
erichb
Messages: 22 Registered: February 2013
Karma: 0
|
Junior Member |
|
|
Looking to replace felt channels on the two main and two rear windows. Both the channels and the strip between the two windows on the living room windows.
Does there exist a write up and parts list.
Does window need removal or partial disassemble only
Thanks.
73 Canyonlands, Fresh TH425 and FD, Bags and Pins updated. Needs A/C, Top and Front service....Minneapolis
|
|
|
Re: window felt [message #277873 is a reply to message #277866] |
Fri, 15 May 2015 14:08 |
jtfred
Messages: 132 Registered: January 2015 Location: Grand Marais, MN
Karma: 0
|
Senior Member |
|
|
I think most folks will point you to Jim Bound's site. He has a very detailed description on how to reseal your windows. Here is a link:
http://www.gmccoop.com/new_page_9.htm - http://tinyurl.com/kgu4f6j
I haven't done it yet, but it is on the list of things to get done eventually. Unfortunately the list is growing rather than shrinking.
Good luck!
John
John Fredrikson
Grand Marais, MN
1978 Eleganza
|
|
|
Re: window felt [message #277877 is a reply to message #277873] |
Fri, 15 May 2015 14:41 |
appie
Messages: 902 Registered: April 2013 Location: denmark
Karma: 2
|
Senior Member |
|
|
The channels are easyly done with windows in place. The vertical felt between the glasses can only be done if you take out the glass. On the small front windows you have to take out the complete window.
Appie
eleganza 76 "Olga" now sadly sold
6 wheel discbrake
Quadrabags
Springfield stage 2 462 olds
Manny tranny
( pictures at http://www.gmcmhphotos.com/photos/g6489-olga.html
Fulltiming in Europe july 2014 til july 2016
Denmark
|
|
|