| Does 780rpms idle/10degrees tdc 17inches vac sound ok [message #277564] |
Sat, 09 May 2015 15:26  |
budworks521
Messages: 137
Registered: October 2013
Location: Grand Rapids MI 1974 Pain...
Karma:
|
Senior Member |
|
|
I was wondering if a good basis point of 780 rpms, 10 degrees tdc 17 inches vac, and idle mixture screws at 2.75 turns from seat is a decent starting point for a test drive. I am not flooding out anymore nor stalling. I did have the vac advance line plugged. I also seated a screw tighter for the contact point of the accelerator pedal line. Before the screw never met the contact point. It basically kept the idle stronger when in park. Just wondering if it might be time for a test drive??? Still no electric choke installed but the farmer's choke is working pretty decent. Any other things to look for from your guys experiences would be most helpful. Thanks,also this was my best vac measurement as I tried a few other settings
1974 Painted Desert
455 upper half rebuild
constant project inexperienced mechanic
Grand Rapids Mi
Always trying to learn
[Updated on: Sat, 09 May 2015 15:29] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
