GMCforum: GMCnet » Original 455 intake manifold available - FREE!

Home » Public Forums » GMCnet » Original 455 intake manifold available - FREE!

Show: Today's Messages :: Polls :: Message Navigator

Original 455 intake manifold available - FREE! [message #277383]

Wed, 06 May 2015 11:37

westlanddave78

Messages: 27
Registered: March 2006
Location: Westland, MI

Karma: 0

Junior Member

I replaced the intake manifold on our 75 PB with the new aluminum one, mostly to get rid of the exhaust cross-overs. If anyone needs an original 455 intake manifold, they can have mine. AFAIK, it's in fine shape...no cracks, not modified in any way. PM me if you are interested. I'd prefer not to ship it, but if you can make arrangements for me to drop it off somewhere that will package it and send it out, I'll do so. I'm in Westland, MI.

Dave

Dave P.
Westland, MI
75 Palm Beach

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277386 is a reply to message #277383]

Wed, 06 May 2015 12:27

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Dave, I'm interested. I just need to figure out when I'll be up your way.

Ken Burton
Hebron, IN

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

[Updated on: Wed, 06 May 2015 12:36]

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277397 is a reply to message #277386]

Wed, 06 May 2015 16:22

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

Ken Burton wrote on Wed, 06 May 2015 13:27

Dave, I'm interested. I just need to figure out when I'll be up your way.

Ken Burton
Hebron, IN

Ken,

In early June, we are going to the Glamarama in Goshen, I could pick it up and bring it along then.
Just let me know.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277423 is a reply to message #277397]

Wed, 06 May 2015 21:37

Pryzl1

Messages: 100
Registered: November 2011
Location: Toledo, OH

Karma: 0

Senior Member

I'm also interested in the manifold. I have a 455 engine in the process of being rebuilt and my manifold has a large vertical crack in one of the carburetor ports the thickness of the casting. Is the manifold still available?

John 1976 GMC Eleganza II - "The Never Ending Story" Partial Restoration - a work in progress 455cc NW Ohio Member of the GMCMI, GMC Great Lakers Motorhome Club, GMCES and Dixielanders

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277435 is a reply to message #277383]

Thu, 07 May 2015 07:34

westlanddave78

Messages: 27
Registered: March 2006
Location: Westland, MI

Karma: 0

Junior Member

Hi all. Ken Burton was the first to respond, so the manifold is his.

Dave P.
Westland, MI
75 Palm Beach

Report message to a moderator

Re: [GMCnet] Original 455 intake manifold available - FREE! [message #277448 is a reply to message #277435]

Thu, 07 May 2015 13:47

Dolph Santorine

Messages: 1236
Registered: April 2011
Location: Wheeling, WV

Karma: -41

Senior Member

That’s great, but I have a free one too.

Dolph

> On May 7, 2015, at 8:34 AM, David Pilon wrote:
>
> Hi all. Ken Burton was the first to respond, so the manifold is his.
> --
> Dave P.
> Westland, MI
> 75 Palm Beach
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Original 455 intake manifold available - FREE! [message #277449 is a reply to message #277448]

Thu, 07 May 2015 13:51

Dolph Santorine

Messages: 1236
Registered: April 2011
Location: Wheeling, WV

Karma: -41

Senior Member

Let’s try thing again -

I have an original 455 intake for free. It was magna fluxed and is good.

Originally I thought Ken Burton had it, but it seems he has a different one.

So, it’s in Wheeling, WV.

Who’s up next?

Dolph

> On May 7, 2015, at 2:47 PM, Dolph Santorine wrote:
>
> That’s great, but I have a free one too.
>
> Dolph
>
>
>> On May 7, 2015, at 8:34 AM, David Pilon wrote:
>>
>> Hi all. Ken Burton was the first to respond, so the manifold is his.
>> --
>> Dave P.
>> Westland, MI
>> 75 Palm Beach
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277453 is a reply to message #277383]

Thu, 07 May 2015 16:27

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Posting deleted

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

[Updated on: Thu, 07 May 2015 17:12]

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277454 is a reply to message #277383]

Thu, 07 May 2015 16:29

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Posting Deleted

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

[Updated on: Thu, 07 May 2015 17:12]

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277458 is a reply to message #277383]

Thu, 07 May 2015 17:11

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

OK, I think I figured this out. There are two manifolds. One from Dave and one from Dolf.

I got PMs from Dave and emails from Dolf. I thought I was talking to the same person on both.

So I will take the one from Dave leaving the one from Dolf still available. I'm sorry for the confusion. I think I have it straight now.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: [GMCnet] Original 455 intake manifold available - FREE! [message #277481 is a reply to message #277448]

Thu, 07 May 2015 21:20

Pryzl1

Messages: 100
Registered: November 2011
Location: Toledo, OH

Karma: 0

Senior Member

Dolf,

If no one else has a vested interest in your 455 intake manifold, I would appreciate it. Any idea as to the best way to ship and cost to zip code 43558?

John 1976 GMC Eleganza II - "The Never Ending Story" Partial Restoration - a work in progress 455cc NW Ohio Member of the GMCMI, GMC Great Lakers Motorhome Club, GMCES and Dixielanders

Report message to a moderator

Re: [GMCnet] Original 455 intake manifold available - FREE! [message #277501 is a reply to message #277481]

Fri, 08 May 2015 09:37

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

I'm always late. Anybody else got one?

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277521 is a reply to message #277458]

Fri, 08 May 2015 17:29

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

Ken Burton wrote on Thu, 07 May 2015 18:11

OK, I think I figured this out. There are two manifolds. One from Dave and one from Dolf.

I got PMs from Dave and emails from Dolf. I thought I was talking to the same person on both.

So I will take the one from Dave leaving the one from Dolf still available. I'm sorry for the confusion. I think I have it straight now.

Ken,
You never responded to my offer to bring the manifold to Goshen.
Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277540 is a reply to message #277521]

Fri, 08 May 2015 23:35

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Matt Colie wrote on Fri, 08 May 2015 17:29

Ken Burton wrote on Thu, 07 May 2015 18:11
OK, I think I figured this out. There are two manifolds. One from Dave and one from Dolf.

I got PMs from Dave and emails from Dolf. I thought I was talking to the same person on both.

So I will take the one from Dave leaving the one from Dolf still available. I'm sorry for the confusion. I think I have it straight now.

Ken,
You never responded to my offer to bring the manifold to Goshen.
Matt

I did not know that I had deadline to respond.

Yes, that is a great idea. Do it and I'll notify you if something changes between now and then. Goshen is around 100 miles vs. 250 for me to go to Westland. Just let me know when and where to meet you.

Thanks.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277554 is a reply to message #277540]

Sat, 09 May 2015 10:59

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

Ken,

I didn't include a time limit, but I sort of expected a response so I could set up with Dave without interfering.

Matt

Ken Burton wrote on Sat, 09 May 2015 00:35

Ken,
You never responded to my offer to bring the manifold to Goshen.
Matt

I did not know that I had deadline to respond.

Yes, that is a great idea. Do it and I'll notify you if something changes between now and then. Goshen is around 100 miles vs. 250 for me to go to Westland. Just let me know when and where to meet you.

Thanks.[/quote]

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277574 is a reply to message #277554]

Sat, 09 May 2015 22:22

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Go ahead and set it up with Dave. Then let me know when you will be in Goshen. I'll come over and maybe we can have lunch or something.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: Original 455 intake manifold available - FREE! [message #277587 is a reply to message #277574]

Sun, 10 May 2015 08:51

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

Ken Burton wrote on Sat, 09 May 2015 23:22

Go ahead and set it up with Dave. Then let me know when you will be in Goshen. I'll come over and maybe we can have lunch or something.

Roger
Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] Original 455 intake manifold available - FREE! [message #277591 is a reply to message #277587]

Sun, 10 May 2015 10:56

Dolph Santorine

Messages: 1236
Registered: April 2011
Location: Wheeling, WV

Karma: -41

Senior Member

Keep me in the loop.. I’m game!

Dolph

> On May 10, 2015, at 9:51 AM, Matt Colie wrote:
>
> Ken Burton wrote on Sat, 09 May 2015 23:22
>> Go ahead and set it up with Dave. Then let me know when you will be in Goshen. I'll come over and maybe we can have lunch or something.
>
> Roger
> Matt
> --
> Matt & Mary Colie - Members GMCMI, GMCES
> '73 Glacier 23 - Still Loving OE Rear Drum Brake with Applied Control Arms
> SE Michigan - Twixt A2 and Detroit
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Original 455 intake manifold available - Dave, sent a PM [message #277604 is a reply to message #277591]

Sun, 10 May 2015 18:52

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

Dave,

I sent you a private message with contact request.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] Original 455 intake manifold available - FREE! [message #277653 is a reply to message #277591]

Mon, 11 May 2015 10:31

Pryzl1

Messages: 100
Registered: November 2011
Location: Toledo, OH

Karma: 0

Senior Member

Dolph,

Did you get my PM? Are we still good to meet in a couple of weeks for a meal and manifold pick-up?

John 1976 GMC Eleganza II - "The Never Ending Story" Partial Restoration - a work in progress 455cc NW Ohio Member of the GMCMI, GMC Great Lakers Motorhome Club, GMCES and Dixielanders

Report message to a moderator

Pages (2): [1 2 › »]

Previous Topic:	Electrolevel II Problem
Next Topic:	Introduction and Alcoa Question

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 20 04:32:34 CST 2024

Total time taken to generate the page: 0.01474 seconds