GMCforum: GMCnet » Valve Stems / Ballance Beads

Home » Public Forums » GMCnet » Valve Stems / Ballance Beads (Should I replace the valve stems on Alcoas when I get new tires?)

Show: Today's Messages :: Polls :: Message Navigator

Valve Stems / Ballance Beads [message #276599]

Thu, 23 April 2015 22:32

jtfred

Messages: 132
Registered: January 2015
Location: Grand Marais, MN

Karma:

Senior Member

My first plan of action for the new coach is new tires. It already has Alcoas. Should I replace the valve stems when I get tires? If so, which stems will I need?

I have read a bit about the balance beads and air soft pellets some have used. It sounds like the pellets work but maybe not until you get up to speed. I have also read some posts where they did not work and had to be removed. Should I have the tires spin balanced or use the beads/pellets? The wheels currently have the lead weights crimped onto the rim so they may already have damage from the dissimilar metals.

Thanks,
John Fredrikson
Fayetteville, GA
'78 Eleganza

John Fredrikson Grand Marais, MN 1978 Eleganza

Report message to a moderator

[Message index]

		Valve Stems / Ballance Beads By: jtfred on Thu, 23 April 2015 22:32
		Re: [GMCnet] Valve Stems / Ballance Beads By: ljdavick on Thu, 23 April 2015 22:50
		Re: [GMCnet] Valve Stems / Ballance Beads By: Ken Henderson on Thu, 23 April 2015 23:22
		Re: [GMCnet] Valve Stems / Ballance Beads By: Ken Burton on Fri, 24 April 2015 02:09
		Re: Valve Stems / Ballance Beads By: jtfred on Fri, 24 April 2015 06:02
		Re: [GMCnet] Valve Stems / Ballance Beads By: Ken Henderson on Fri, 24 April 2015 10:44
		Re: Valve Stems / Ballance Beads By: Ken Burton on Fri, 24 April 2015 11:05
		Re: Valve Stems / Ballance Beads By: Jeff Marten on Fri, 24 April 2015 07:57
		Re: Valve Stems / Ballance Beads By: jtfred on Fri, 24 April 2015 13:17
		Re: [GMCnet] Valve Stems / Ballance Beads By: Ken Henderson on Fri, 24 April 2015 17:54
		Re: [GMCnet] Valve Stems / Ballance Beads By: JShot on Fri, 24 April 2015 20:06
		Re: [GMCnet] Valve Stems / Ballance Beads By: Ken Burton on Sat, 25 April 2015 00:24
		Re: [GMCnet] Valve Stems / Ballance Beads By: thesmith on Sat, 25 April 2015 06:46
		Re: [GMCnet] Valve Stems / Ballance Beads By: Ken Henderson on Sat, 25 April 2015 07:30
		Re: [GMCnet] Valve Stems / Ballance Beads By: Jim Galbavy on Sat, 25 April 2015 21:24
		Re: Valve Stems / Ballance Beads By: rickmike on Fri, 24 April 2015 21:12
		Re: [GMCnet] Valve Stems / Ballance Beads By: Ken Henderson on Fri, 24 April 2015 22:25

Previous Topic:	Manual misprint
Next Topic:	455 Rocket

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 29 03:23:42 CST 2024

Total time taken to generate the page: 0.02453 seconds