master cylinder cap or gasket [message #276016] |
Fri, 17 April 2015 06:31 |
erichb
Messages: 22 Registered: February 2013
Karma: 0
|
Junior Member |
|
|
Orig MC, cap not performing well. Is there a part number for a new cap or gasket. OR does this fall under tough bounce. On the road for weekend and noticed a lot of fluid on the wrong side of MC and poor breaking late last night
Thx
73 Canyonlands, Fresh TH425 and FD, Bags and Pins updated. Needs A/C, Top and Front service....Minneapolis
|
|
|
|
Re: master cylinder cap or gasket [message #276062 is a reply to message #276017] |
Fri, 17 April 2015 12:19 |
erichb
Messages: 22 Registered: February 2013
Karma: 0
|
Junior Member |
|
|
Thanks Matt, can pick it up tomorrow. Will limp along today in northern MN
Is there a way to find out if a person is a member of this forum. I ask because I met a guy 2 years ago in town that has about 4 gmc rigs. I believe he had a glass company here in Bemidji .... but I lost his card. John I think was his name
As a limo along can't I just carve up some tubing and cover the deteriorated area vs dump fluid
73 Canyonlands, Fresh TH425 and FD, Bags and Pins updated. Needs A/C, Top and Front service....Minneapolis
|
|
|
|
|
Re: master cylinder cap or gasket [message #276175 is a reply to message #276169] |
Sat, 18 April 2015 21:23 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I also bought that gasket at a small auto parts store when we were at the GMCMI rally in Wisconsin last year. They are readily available at many auto parts stores.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|