GMCforum: GMCnet » Rear Bake Cylinder sizes

Home » Public Forums » GMCnet » Rear Bake Cylinder sizes

Show: Today's Messages :: Polls :: Message Navigator

Rear Bake Cylinder sizes [message #275609]

Fri, 10 April 2015 21:46

Tony Cook

Messages: 121
Registered: August 2014
Location: Torrance CA

Karma: 0

Senior Member

Do the larger size wheel cylinders go on the mid axle and smaller on the rears just pulled brakes apart and seems like the old PO ones are both the same size smaller ones on my right side if i read right the 15/16 are rear ( smaller ones ) and 1 1/16 ( larger ones ) are middle wheels ? Thanks Tony

Tony Cook 77' Kingsley ' SuperSession 77 ' Torrance Beach,CA

Report message to a moderator

Re: Rear Bake Cylinder sizes [message #275612 is a reply to message #275609]

Fri, 10 April 2015 22:55

Bob de Kruyff

Messages: 4260
Registered: January 2004
Location: Chandler, AZ

Karma: 1

Senior Member

Tony Cook wrote on Fri, 10 April 2015 20:46

Do the larger size wheel cylinders go on the mid axle and smaller on the rears just pulled brakes apart and seems like the old PO ones are both the same size smaller ones on my right side if i read right the 15/16 are rear ( smaller ones ) and 1 1/16 ( larger ones ) are middle wheels ? Thanks Tony

Mid axle

Bob de Kruyff
78 Eleganza
Chandler, AZ

Report message to a moderator

Re: [GMCnet] Rear Bake Cylinder sizes [message #275618 is a reply to message #275609]

Fri, 10 April 2015 23:59

powwerjon

Messages: 849
Registered: March 2013

Karma: -2

Senior Member

Tony,
The rear bogy typically run a 15/16” slave cylinders and you can run either the 1 1/16" or 1 1/8”, but I would stay with the 1 1/16” and used the carbon metallic shoes. I ran that combo on our first coach for about 8 or 9 years and it worked very will.

http://www.appliedgmc.com/prod.itml/icOid/607
or
John Evans direct @ 2455eva@pce.net or 716 652-6868

J.R. Wright
30' Buskirk Stretch
Michigan
On Location in Tucson

> On Apr 10, 2015, at 7:46 PM, Tony Cook wrote:
>
> Do the larger size wheel cylinders go on the mid axle and smaller on the rears just pulled brakes apart and seems like the old PO ones are both the
> same size smaller ones on my right side if i read right the 15/16 are rear ( smaller ones ) and 1 1/16 ( larger ones ) are middle wheels ? Thanks Tony
> --
> Tony Cook
> 77' Kingsley ' SuperSession 77 '
> Torrance Beach,CA
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: Rear Bake Cylinder sizes [message #275621 is a reply to message #275609]

Sat, 11 April 2015 00:25

Tony Cook

Messages: 121
Registered: August 2014
Location: Torrance CA

Karma: 0

Senior Member

Thanks a bunch guys

Tony Cook 77' Kingsley ' SuperSession 77 ' Torrance Beach,CA

Report message to a moderator

Previous Topic:	[GMCnet] Ford Azure Vacuum Pump
Next Topic:	dash air charging

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 17 19:36:08 CST 2024

Total time taken to generate the page: 0.00998 seconds