GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] By, by plastic fan
[GMCnet] By, by plastic fan [message #275513] Thu, 09 April 2015 12:16 Go to next message
glwgmc is currently offline  glwgmc   United States
Messages: 1014
Registered: June 2004
Karma: 10
Senior Member
After lots of fiddling trying to find a clutch that will perform properly with the set up in my Clasco I have decided enough is enough and have gone back to the stock steel fan. I have no explanation as to why the plastic fan does not play well in my coach as others report good results and no issues so it must be something different here that is the root cause, not the plastic fan itself. My hat is off to JohnB for bringing this product to our community, but I am not inclined to do any more swapping of parts to try to make it work. So, the first $80 plus shipping gets the plastic fan and I have a number of different fan clutches that were purchased recently to try to find one that would engage only when it should that are available for $30 each plus shipping if any of you need one. Let me know what you are looking for.

Jerry
Jerry & Sharon Work
Kerby, OR
glwork@mac.com
http://jerrywork.com

78 Royale
77/94 Clasco

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Jerry & Sharon Work
78 Royale
Kerby, OR
Re: [GMCnet] By, by plastic fan [message #275514 is a reply to message #275513] Thu, 09 April 2015 12:23 Go to previous messageGo to next message
hal kading is currently offline  hal kading   United States
Messages: 642
Registered: February 2004
Location: Las Cruces NM
Karma: 4
Senior Member
Jerry,

Which thermostat are you using or have tried?

Hal Kading 78 Buskirk Las Cruces NM
Re: [GMCnet] By, by plastic fan [message #275523 is a reply to message #275513] Thu, 09 April 2015 17:30 Go to previous message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
Senior Member
Jerry,

I'll take the fan.

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426


-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Gerald Work
Sent: Friday, April 10, 2015 3:17 AM
To: Gmc Forum
Subject: [GMCnet] By, by plastic fan

After lots of fiddling trying to find a clutch that will perform properly with the set up in my Clasco I have decided enough is
enough and have gone back to the stock steel fan. I have no explanation as to why the plastic fan does not play well in my coach as
others report good results and no issues so it must be something different here that is the root cause, not the plastic fan itself.
My hat is off to JohnB for bringing this product to our community, but I am not inclined to do any more swapping of parts to try to
make it work. So, the first $80 plus shipping gets the plastic fan and I have a number of different fan clutches that were
purchased recently to try to find one that would engage only when it should that are available for $30 each plus shipping if any of
you need one. Let me know what you are looking for.

Jerry
Jerry & Sharon Work
Kerby, OR
glwork@mac.com
http://jerrywork.com

78 Royale
77/94 Clasco

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
Previous Topic: GMC stretch question
Next Topic: [GMCnet] Made It Home
Goto Forum:
  


Current Time: Tue Nov 19 06:31:36 CST 2024

Total time taken to generate the page: 0.01063 seconds