Home » Public Forums » GMCnet » [GMCnet] SeaFlo Macerator
| [GMCnet] SeaFlo Macerator [message #274517] |
Sat, 28 March 2015 16:10  |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
G'day,
Cancelled the order for this SeaFlo macerator:
http://www.ebay.com/itm/SEAFLO-Brand-Marine-and-RV-Macerator-Pump-12-Volts-/151611259988
and ordered this SeaFlo macerator:
http://www.ebay.ie/itm/161575965374
The order was changed because the latter is a "quick disconnect" unit which will reduce work required to replace it when combined
with a plug in connection for power.
It is being sent to Australia so I can disassemble it to:
1) compare it to the Jabsco here
2) modify it to include a way of turning the shaft
3) come up with a way to make the mounting QD as well
Regards,
Rob M.
The Pedantic Mechanic
USAussie - Downunder
USA '75 Avion - Double Trouble TZE365V100426
AUS '75 Avion - The Blue Streak TZE365V100428
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] SeaFlo Macerator [message #274583 is a reply to message #274577] |
Sun, 29 March 2015 21:41  |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Guys,
I ordered the model with the "regular 4 pin coupling" because it will act as a QUICK DISCONNECT.
The mating part that comes with the pump will become part of the permanent installation.
I'll attach a two pin connector to the GMC supply and a mating part to the macerator.
Hopefully I can come up with a way to mount the feet so it too can be detached without tools.
If the unit seizes or fails I can remove and replace it in a heartbeat when I do something stupid like putting paper towels down the
loo! ;-)
Regards,
Rob M.
-----Original Message-----
From: Matt Colie
Espen,
There is no "regular 4 pin coupling".
There are Thetford, Valtera, Camco, Blue Line and someone I have forgotten. Thetford is the white fittings used on original GMC.
Thetford
connections are not interchangeable with anybodies. The later four are sort of interchangeable on a single part case.
I think you better plan on using the mating part that comes with the pump.
Matt
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] SeaFlo Macerator [message #274586 is a reply to message #274577] |
Mon, 30 March 2015 06:28 |
 |
Loffen
Messages: 1087
Registered: August 2013
Location: Norway
Karma: 1
|
Senior Member |
|
|
That is what I was afraid of, well then it is just to wait and see what Rob comes up with 
Matt Colie wrote on Mon, 30 March 2015 03:13Loffen wrote on Sun, 29 March 2015 20:25I did see that one, the question is if it will fit a regular 4 pin coupling
Espen,
There is no "regular 4 pin coupling".
There are Thetford, Valtera, Camco, Blue Line and someone I have forgotten. Thetford is the white fittings used on original GMC. Thetford connections are not interchangeable with anybodies. The later four are sort of interchangeable on a single part case.
I think you better plan on using the mating part that comes with the pump.
Matt
1973 23' # 1848 Sky Blue Glacier called Baby Blue and a 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Green,
And sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel
in Norway
|
|
|
|
|
|
| Re: [GMCnet] SeaFlo Macerator - pictures available [message #274591 is a reply to message #274589] |
Mon, 30 March 2015 11:37 |
powwerjon
Messages: 849
Registered: March 2013
Karma: -2
|
Senior Member |
|
|
Matt,
I typically shoot in a 640 X 480 resolution (almost all pictures that I have loaded over the years) or it may be called small or the next size called M3 which is 1600 X 1200 pixels resolution. These 2 sizes make very good pictures that will load on the photo size. Your resolution is probably in L (large) which makes for a very large resolution (size). Your going to need to rescale the pictures down to a much smaller size. Your camera may allow you to resize and save the new picture. The higher resolution doesn’t make the pictures any better, just takes up more space. As a Mac using I can resize with the Preview program, not being a PC user, there are some free programs that will allow you to shrink resolution down.
J.R. Wright
30' Buskirk Stretch
Michigan
On Location in Tucson
> On Mar 30, 2015, at 8:05 AM, Billy Massey wrote:
>
> WOW!
> 5.4mb ea, 4608 X 3456 pixels X 16 million colors X 7 photos = ~38mb upload.
>
> Yep, you got some trimming to do. The photo archive does get tired of
> waiting.
>
> To upload or attach reasonable size photos, I use:
> http://www.onthegosoft.com/shrink_pic.htm?
> It works very well and is seamless.
>
> bdub
>
>
> -----Original Message-----
> From: Gmclist On Behalf Of Matt Colie
> Sent: Sunday, March 29, 2015 8:04 PM
>
> I tried to post the pictures to the GMC gallery, but it crashed. Maybe
> because the pictures are too big. It is a new camera and I don't yet know
> everything I need to know about it. But if you want to see the non-quick
> disconnect version, pick up this link to my dropbox. They will be though 05
> April 2015.
>
> https://www.dropbox.com/sh/85txqovdz26ighq/AABYU2A-sJ3Fy9NTD6h1BD5Sa?dl=0
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] SeaFlo Macerator - pictures available [message #274592 is a reply to message #274591] |
Mon, 30 March 2015 12:49 |
Olly Schmidt
Messages: 1265
Registered: February 2014
Location: Germany and Scottsville, ...
Karma: 8
|
Senior Member |
|
|
I always shoot in the highest possible resolution. That way, I can later
decide if I want to cut stuff out of the picture, have the picture
printed on a large scale printer, or scale it down to send it via mail.
You never know, when a picture might be perfect for a situation other
than just mail. Shooting at 640x480 makes you loose the ability to print
larger than a small photo.
--
Best regards
Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA
'76a Eleganza II, VA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Best regards
Olly Schmidt
PGP Key ID: 0x18a9 3a1f 4196 bf22
'76a Eleganza II, VA
'73 Sequoia, SH, Germany
|
|
|
|
| Re: [GMCnet] SeaFlo Macerator - pictures available [message #274594 is a reply to message #274589] |
Mon, 30 March 2015 15:06 |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
G'day,
For those of you that use Microsoft products they have a program called Microsoft Picture Manager (MPM) that does simple photo
editing such as brightness & contrast adjustment, color adjustment, cropping, rotate & flip, red eye removal, resizing, and
compressing,
I did a Google search and it came up with the site below to download it. If you do decide to download it be careful to check that
MPM is all you download. A lot of these free download sites lump a bunch of crap you don't want in with the main download!
http://microsoft-office-picture-manager.apponic.com/
Regards,
Rob M.
The Pedantic Mechanic
-----Original Message-----
From: Billy Massey
WOW!
5.4mb ea, 4608 X 3456 pixels X 16 million colors X 7 photos = ~38mb upload.
Yep, you got some trimming to do. The photo archive does get tired of
waiting.
To upload or attach reasonable size photos, I use:
http://www.onthegosoft.com/shrink_pic.htm?
It works very well and is seamless.
bdub
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] SeaFlo Macerator [message #274595 is a reply to message #274517] |
Mon, 30 March 2015 15:33 |
rcjordan
Messages: 1913
Registered: October 2012
Location: Elizabeth City, North Car...
Karma: 1
|
Senior Member |
|
|
Win:
With a million downloads per month, Irfanview is the big dog but it's probably overkill for just resizing.
Faststone has some paid programs that are popular, I see they have a separate resizer. The UI looks intuitive, too.
http://www.faststone.org/FSResizerDetail.htm
BTW, reducing your jpg Color Depth to 256 as well as resizing can make additional, substantial reduction in size.
SOLD 77 Royale Coachmen Side Dry Bath
76 Birchaven Coachmen Side Wet Bath
76 Eleganza
Elizabeth City, NC
|
|
|
|
|
|
| Re: [GMCnet] SeaFlo Macerator - pictures available [message #274608 is a reply to message #274589] |
Mon, 30 March 2015 19:59 |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Billy,
It is a new camera. (Three days now.) It turns out that the half-life of complex cameras is about five years, so the old one did OK. It just started to do strange things while I was shooting daughter's baby shower. Glad this didn't happen in Yellowstone.
I always shoot at the highest resolution unless I am shooting to up load, then I turn it down or post-process.
There in is the problems. My usual post-process package choked on the file size and I haven't figured out how to turn this camera down yet.
I'm only about half way through the 200+ page manual. I still don't know how to make a phone call or program it to start the morning coffee. I'll get there before Rapid City.
Matt
bdub wrote on Mon, 30 March 2015 11:05WOW!
5.4mb ea, 4608 X 3456 pixels X 16 million colors X 7 photos = ~38mb upload.
Yep, you got some trimming to do. The photo archive does get tired of
waiting.
To upload or attach reasonable size photos, I use:
http://www.onthegosoft.com/shrink_pic.htm?
It works very well and is seamless.
bdub
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
Goto Forum:
Current Time: Fri Nov 15 08:42:22 CST 2024
Total time taken to generate the page: 0.01171 seconds
|
GMCforum
Search
Help
Register
Login
Home
