[GMCnet] Shift Cable Bellows (boot) [message #274001] |
Thu, 19 March 2015 10:23 |
Tom Whitton
Messages: 235 Registered: February 2004 Location: Paducah, KY
Karma:
|
Senior Member |
|
|
Ken,
I looked for one unsuccessfully a couple of years ago. After giving up I made one out of a rubber glove finger. It works fine.
Tom Whitton
26 foot updated GMC
Paducah, KY
Does anyone have a source or after-market part number for the boot (bellows) that goes on the ends of the shift cable. I found the entire cable
listed on Jim K's site and also on the GMCmhparts site and the GMCMI parts interchange. It is figure 17.045 of the parts manual item 2 but that shows
up as the entire cable and is listed as no longer available.
I did call Jim K. and left him a voice mail. I also asked for Nick but was told that he also was not there. Jim will probably call me back tomorrow
but if anyone has the above information, I would appreciate it in case Jim does not have what I need.
Ken B.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|