| House Monitor Panel [message #273800] |
Mon, 16 March 2015 11:08  |
Galen
Messages: 146
Registered: November 2011
Location: New Virginia, IA
Karma:
|
Senior Member |
|
|
Has anyone ever repaired their house monitor panel? The instrument cluster with the gauges for LP, waste, water, and battery? Mine works on System Check, but not on Monitor On. All the senders (minus the waste tank - it's disconnected) work fine and measure accurately on System Check. I have good supply voltage, a good ground, and the lights work on both modes but the gauges are unresponsive only on Monitor On.
I need to pull it, but looking at the trace it's a pretty simple circuit with what appears to be only two components (aside from the bulbs and gauges themselves. I could see one from the front and it looks like a diode or maybe a zener diode, and I'm guessing one of these two is bad. Just from a quick glance at the traces it looks like these are in series with the switched source voltage.
Just wondering if anyone had ever documented these. Thanks.
Galen
edit to add - this is the stock panel from a 78 palm beach I am speaking of.
Galen Briggs
New Virginia, Iowa
1978 Palm Beach
[Updated on: Mon, 16 March 2015 11:09] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
