| [GMCnet] Air Bag Hardware [message #273659] |
Fri, 13 March 2015 20:11  |
Daniel DeLuca
Messages: 120
Registered: June 2014
Karma: 0
|
Senior Member |
|
|
Hello,
My airbag blew the other day. Today I started to take off the old bag, I have never messed with pneumatics before. Can point me in the right direction when it comes the hardware. The threaded fitting attached to the tube broke off right at the fitting. Is it possible to put a new fitting not the tube? What sized fitting do I need to attach to the new bag? Also what size are the original nuts 1”? Thanks!
Dan
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Air Bag Hardware [message #273663 is a reply to message #273659] |
Fri, 13 March 2015 20:31  |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Dan,
Send photos of the end of the air bag and the broken end of the line to:
robmueller@iinet.net.au
Regards,
Rob M.
The Pedantic Mechanic
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Daniel DeLuca
Sent: Friday, March 13, 2015 8:12 PM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Air Bag Hardware
Hello,
My airbag blew the other day. Today I started to take off the old bag, I have never messed with pneumatics before. Can point me in
the right direction when it comes the hardware. The threaded fitting attached to the tube broke off right at the fitting. Is it
possible to put a new fitting not the tube? What sized fitting do I need to attach to the new bag? Also what size are the original
nuts 1"? Thanks!
Dan
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
| Re: [GMCnet] air bag [message #285127 is a reply to message #273659] |
Sun, 16 August 2015 15:57 |
Jim at the Co-op
Messages: 291
Registered: May 2014
Location: Orlando Florida
Karma: 2
|
Senior Member |
|
|
If you have shut offs at your bags, close them then push l&r to raise . Liosen the lunes coming off the last solenoid on each tree leg and see if you get tnak pressure. Heat depends on how long they were on
Jim Bounds
Sent from my T-Mobile 4G LTE Device
-------- Original message --------
From: Dan Gibb
Date: 08/16/2015 2:42 PM (GMT-05:00)
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] air bag
Yesterday the bags pumped up through the scrader valve, today they won't . The solenoids on top of the valve group are hot and seems like they are not
sending air through the system. The garage compressor is not coming on or loosing pressure as it would if I had a leak or if it was filling the bags.
Is the high temp of the solenoid valves normal?
--
Dan Gibb
1977 Eleganza II
Tucson, Az
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
