Home » Public Forums » GMCnet » OEM Cockpit Table Mounting Hardware
| OEM Cockpit Table Mounting Hardware [message #271475] |
Mon, 09 February 2015 06:46  |
mickey szilagyi
Messages: 273
Registered: January 2013
Karma: 0
|
Senior Member |
|
|
We are making a replacement for the original cockpit table. When we purchased our GMC the table was not in it but the mounting hardware was still on the dash. It appears the hardware pieces that go on the dash and the table are not the same as the hardware used to mount the dinette table. We can't find the hardware needed to mate with what is on the dash, the piece that would go on the back edge of the cockpit table. Does anyone know where we can get a piece of the correct bracket, a part number or what it is called? Here's what it looks like.
http://www.gmcmhphotos.com/photos/cockpit-table/p57201-cockpit-table-dash-bracket.html
Thanks everyone for your help.
Mickey
1977 Kingsley, 403, Lansing, MI
|
|
|
|
| Re: [GMCnet] OEM Cockpit Table Mounting Hardware [message #271476 is a reply to message #271475] |
Mon, 09 February 2015 06:54  |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Mickey
If you don't get any other offers, I can send you what you're looking for
if you'll pay shipping.
Just let me know.
Mike in NS
On Mon, Feb 9, 2015 at 8:46 AM, Mickey Szilagyi
wrote:
> We are making a replacement for the original cockpit table. When we
> purchased our GMC the table was not in it but the mounting hardware was
> still on
> the dash. It appears the hardware pieces that go on the dash and the
> table are not the same as the hardware used to mount the dinette table. We
> can't find the hardware needed to mate with what is on the dash, the piece
> that would go on the back edge of the cockpit table. Does anyone know
> where we can get a piece of the correct bracket, a part number or what it
> is called? Here's what it looks like.
>
>
> http://www.gmcmhphotos.com/photos/cockpit-table/p57201-cockpit-table-dash-bracket.html
>
> Thanks everyone for your help.
> --
> Mickey
> 1977 Kingsley, 403, Lansing, MI
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
Life is too short to hold a grudge; slash some tires and call it even !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] OEM Cockpit Table Mounting Hardware [message #271477 is a reply to message #271476] |
Mon, 09 February 2015 07:09 |
Bruce Hart
Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Jim K has the hardware.
On Mon, Feb 9, 2015 at 6:00 AM, Kingsley Coach
wrote:
> Mickey
> I re read your note....I have the whole table as well if you want it but
> it's a bit rough. I can send you a pic first if you want.
> Same price...free for the shipping costs.
>
> Mike in NS
>
> On Mon, Feb 9, 2015 at 8:54 AM, Kingsley Coach
> wrote:
>
>> Mickey
>> If you don't get any other offers, I can send you what you're looking for
>> if you'll pay shipping.
>> Just let me know.
>> Mike in NS
>>
>> On Mon, Feb 9, 2015 at 8:46 AM, Mickey Szilagyi mickey@apex-internet.com>
>> wrote:
>>
>>> We are making a replacement for the original cockpit table. When we
>>> purchased our GMC the table was not in it but the mounting hardware was
>>> still on
>>> the dash. It appears the hardware pieces that go on the dash and the
>>> table are not the same as the hardware used to mount the dinette
> table. We
>>> can't find the hardware needed to mate with what is on the dash, the
>>> piece that would go on the back edge of the cockpit table. Does anyone
> know
>>> where we can get a piece of the correct bracket, a part number or what
> it
>>> is called? Here's what it looks like.
>>>
>>>
>>>
> http://www.gmcmhphotos.com/photos/cockpit-table/p57201-cockpit-table-dash-bracket.html
>>>
>>> Thanks everyone for your help.
>>> --
>>> Mickey
>>> 1977 Kingsley, 403, Lansing, MI
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>
>>
>>
>> --
>> Michael Beaton
>> 1977 Kingsley 26-11
>> 1977 Eleganza II 26-3
>> Antigonish, NS
>>
>> Life is too short to hold a grudge; slash some tires and call it even !
>>
>>
>>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
>
> Life is too short to hold a grudge; slash some tires and call it even !
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: [GMCnet] OEM Cockpit Table Mounting Hardware [message #271478 is a reply to message #271476] |
Mon, 09 February 2015 07:00 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Mickey
I re read your note....I have the whole table as well if you want it but
it's a bit rough. I can send you a pic first if you want.
Same price...free for the shipping costs.
Mike in NS
On Mon, Feb 9, 2015 at 8:54 AM, Kingsley Coach
wrote:
> Mickey
> If you don't get any other offers, I can send you what you're looking for
> if you'll pay shipping.
> Just let me know.
> Mike in NS
>
> On Mon, Feb 9, 2015 at 8:46 AM, Mickey Szilagyi
> wrote:
>
>> We are making a replacement for the original cockpit table. When we
>> purchased our GMC the table was not in it but the mounting hardware was
>> still on
>> the dash. It appears the hardware pieces that go on the dash and the
>> table are not the same as the hardware used to mount the dinette table. We
>> can't find the hardware needed to mate with what is on the dash, the
>> piece that would go on the back edge of the cockpit table. Does anyone know
>> where we can get a piece of the correct bracket, a part number or what it
>> is called? Here's what it looks like.
>>
>>
>> http://www.gmcmhphotos.com/photos/cockpit-table/p57201-cockpit-table-dash-bracket.html
>>
>> Thanks everyone for your help.
>> --
>> Mickey
>> 1977 Kingsley, 403, Lansing, MI
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
>
> Life is too short to hold a grudge; slash some tires and call it even !
>
>
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
Life is too short to hold a grudge; slash some tires and call it even !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
| Re: OEM Cockpit Table Mounting Hardware [message #271513 is a reply to message #271475] |
Mon, 09 February 2015 14:16 |
mickey szilagyi
Messages: 273
Registered: January 2013
Karma: 0
|
Senior Member |
|
|
Mike and Larry. Here's a great picture of the table, credit given to carguy, don't know who you are.
http://www.gmcmhphotos.com/photos/misc-gmc-photos/p17363.html
Mike, if the hardware you have on the table you have is what we need please email me and we'll pay the shipping for the hardware, table or one or the other. We really don't need the table especially if it's in rough shape but the piece of hardware that's on the back of the table that goes onto the bracket/track on the dash is what we really need. It is not the same stuff that Jim K sells or at least not what is shown on his website. It's not the same hardware track that holds the original dinette table. We don't know if GMC fashioned the track themselves but we can't find it anywhere that we've looked.
Mike, we also need the foldup leg although there are a lot of them readily available. We'll have to cut the leg to fit but that's fine, it'a approximately 16 inch from the floor to the bottom of the table. One thing to notice on the cockpit table is that you put it in place with the table down and tip it up in the bracket/track on the dash. That's the opposite of the dinette table which you start with the table raised above the bracket/track and lower the free end until the two bracket/tracks lock in place.
Mike, just in case you can't find our email address it's mickey at apex-internet dot com. And a picture would be greatly appreciated of the bracket at the back of the table.
Thanks everyone for your help.
Mickey
1977 Kingsley, 403, Lansing, MI
|
|
|
|
| Re: [GMCnet] OEM Cockpit Table Mounting Hardware [message #271578 is a reply to message #271513] |
Tue, 10 February 2015 07:27 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Mickey
I'll try to get to my spare coach today. We have had what you would call a
'chit load' of snow lately.
I'll keep you posted off line.
Mike in NS
On Mon, Feb 9, 2015 at 4:16 PM, Mickey Szilagyi
wrote:
> Mike and Larry. Here's a great picture of the table, credit given to
> carguy, don't know who you are.
>
> http://www.gmcmhphotos.com/photos/misc-gmc-photos/p17363.html
>
> Mike, if the hardware you have on the table you have is what we need
> please email me and we'll pay the shipping for the hardware, table or one
> or the
> other. We really don't need the table especially if it's in rough shape
> but the piece of hardware that's on the back of the table that goes onto the
> bracket/track on the dash is what we really need. It is not the same
> stuff that Jim K sells or at least not what is shown on his website. It's
> not
> the same hardware track that holds the original dinette table. We don't
> know if GMC fashioned the track themselves but we can't find it anywhere
> that
> we've looked.
>
> Mike, we also need the foldup leg although there are a lot of them readily
> available. We'll have to cut the leg to fit but that's fine, it'a
> approximately 16 inch from the floor to the bottom of the table. One
> thing to notice on the cockpit table is that you put it in place with the
> table
> down and tip it up in the bracket/track on the dash. That's the opposite
> of the dinette table which you start with the table raised above the
> bracket/track and lower the free end until the two bracket/tracks lock in
> place.
>
> Mike, just in case you can't find our email address it's mickey at
> apex-internet dot com. And a picture would be greatly appreciated of the
> bracket
> at the back of the table.
>
> Thanks everyone for your help.
> --
> Mickey
> 1977 Kingsley, 403, Lansing, MI
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
Life is too short to hold a grudge; slash some tires and call it even !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Tue Jul 02 22:02:48 CDT 2024
Total time taken to generate the page: 0.01204 seconds
|
GMCforum
Search
Help
Register
Login
Home
