GMCforum: GMCnet » "RPM" aluminum manifold manufacture and cost

Home » Public Forums » GMCnet » "RPM" aluminum manifold manufacture and cost

Show: Today's Messages :: Polls :: Message Navigator

"RPM" aluminum manifold manufacture and cost [message #269486]

Mon, 12 January 2015 13:25

Broham

Messages: 204
Registered: March 2013
Location: Detroit, Michigan

Karma: 0

Senior Member

does anyone know the manufacturer and cost of these "RPM" manifold that are adaptable to port fuel injection?

thanks

Todd

http://www.gmcmhphotos.com/photos/gmc-intake-manifold-project/p23896-final-production-aluminum-intake-manifold.html

Todd Owner of a 1976 Eleganza II 26’ other toys: 93 Vette 84 Goldwing and gone but not forgotten 72 CB750 Chopper 96 Caprice Classic 34 Ford roadster 94 Fleetwood

[Updated on: Mon, 12 January 2015 13:25]

Report message to a moderator

Re: "RPM" aluminum manifold manufacture and cost [message #269489 is a reply to message #269486]

Mon, 12 January 2015 13:28

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Yes. Gary Rockwell and it is available from Jim K.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: "RPM" aluminum manifold manufacture and cost [message #269492 is a reply to message #269489]

Mon, 12 January 2015 13:38

Broham

Messages: 204
Registered: March 2013
Location: Detroit, Michigan

Karma: 0

Senior Member

thanks Ken

Todd Owner of a 1976 Eleganza II 26’ other toys: 93 Vette 84 Goldwing and gone but not forgotten 72 CB750 Chopper 96 Caprice Classic 34 Ford roadster 94 Fleetwood

Report message to a moderator

Previous Topic:	Bdub says: Get On Facebook
Next Topic:	Good by Dan

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 12:40:45 CDT 2024

Total time taken to generate the page: 0.00484 seconds