| Front bearing tool wanted [message #267272] |
Sun, 07 December 2014 08:30  |
 |
Loffen
Messages: 1087
Registered: August 2013
Location: Norway
Karma: 1
|
Senior Member |
|
|
Does anyone have a used front bearing tool for sale ?
I just realized that we do not have it in Norway and with 5 GMC's it is much needed, yes I do not need you to ship it to Norway but to my forwarder in NJ.
And if possible payment through paypal as it is nearly impossible to get US checks here.
1973 23' # 1848 Sky Blue Glacier called Baby Blue and a 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Green,
And sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel
in Norway
|
|
|
|
|
|
| Re: Front bearing tool wanted [message #267333 is a reply to message #267332] |
Mon, 08 December 2014 14:11  |
Bullitthead
Messages: 1411
Registered: November 2013
Karma: 5
|
Senior Member |
|
|
Espen,
Howard offered to sell me his for a good price when I bought the knuckle assemblies from him over a year ago. I didn't have the extra funds then, but I had a boatload of various pullers and friends' tools to borrow so I didn't get it from him. I don't know if he still has it. It's probably a good thing I didn't get it because I'm sure I would have broken it trying to get one of the bearings off of the hub, just like I broke the good quality 3-jaw puller that I borrowed from a friend to do that job. That bearing was on there for 40 years and I ended up having to cut it to pieces to remove it. The bearings on the other hubs came off very easily using the same type of 3-jaw puller, no stress and no cussing involved. The setup pictured in the manual looks a lot less formidable than what I was using, so that one bearing must have been telling me to leave it alone and just run with the rotor the way it was. Of course, I was stubborn and wanted to install my newer, thicker rotor on the hub, and it cost me a $135 bearing to prove my point 
If you can get in contact with Howard Nielsen, ask him if he still has it and wants to sell it as he upgraded to the newer front end.
Terry Kelpien
ASE Master Technician
73 Glacier 260
Smithfield, Va.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Front bearing tool wanted [message #267511 is a reply to message #267433] |
Sat, 13 December 2014 10:14 |
Emery Stora
Messages: 959
Registered: January 2011
Karma: 4
|
Senior Member |
|
|
Small delay. I will send pictures as soon as I can get into the motorhome.. i injured my lower back and am not moving very well at the moment. Getting MRI scan soon,.
Emery Stora
> On Dec 11, 2014, at 6:22 PM, Espen Heitmann wrote:
>
> Oh not sure I did get it, I got one mail, but I do not think it was from you, and I did answer it, could you please resend it to
> mailto:bimet@online.no ?
> I have been running around myself the last couple of days, just way to busy so I might be making a fool of myself here, sorry for that, but I will go
> through my shop pc tomorrow and see if it is there.
> --
> 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Mean Green Machine,
> And just sold my 1973 26'-2 # 581 White Canyon lands under the name Dobbelt trøbbel
> in Norway
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Front bearing tool wanted [message #267513 is a reply to message #267511] |
Sat, 13 December 2014 10:58 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Dammit emery stop that we need you
Erf
On Saturday, December 13, 2014, Emery Stora wrote:
> Small delay. I will send pictures as soon as I can get into the
> motorhome.. i injured my lower back and am not moving very well at the
> moment. Getting MRI scan soon,.
>
> Emery Stora
>> On Dec 11, 2014, at 6:22 PM, Espen Heitmann > wrote:
>>
>> Oh not sure I did get it, I got one mail, but I do not think it was from
> you, and I did answer it, could you please resend it to
>> mailto:bimet@online.no ?
>> I have been running around myself the last couple of days, just way to
> busy so I might be making a fool of myself here, sorry for that, but I will
> go
>> through my shop pc tomorrow and see if it is there.
>> --
>> 1973 26'-3 # 1460 Parrot green Seqouia Known as the Big Mean Green
> Machine,
>> And just sold my 1973 26'-2 # 581 White Canyon lands under the name
> Dobbelt trøbbel
>> in Norway
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
