Home » Public Forums » GMCnet » [GMCnet] oil fill pipe
[GMCnet] oil fill pipe [message #263481] |
Sun, 05 October 2014 16:31 |
mjbourgon
Messages: 259 Registered: May 2010
Karma: -1
|
Senior Member |
|
|
Good morning all.
Does any one have an extra oil fill pipe from oil filler in the front of
the coach by engine door to engine itself. It looks like a metal pipe
about 1" in diameter. I am rebuilding a Glennbrook and it was sold to
me with many missing pieces.
Any help would be greatly appreciated. I do not expect if for free and
would be glad to pay a fair price
Thanks
Marcel in El Paso
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] oil fill pipe [message #263494 is a reply to message #263481] |
Sun, 05 October 2014 18:00 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Marcel,
A piece of PVC pipe in the appropriate size works great. A heat gun
enables you to route it however you like. That's what I use for my Cad 500
installation.
HTH,
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI & EBL,
Manny Brakes & 1-Ton, etc., etc.
www.gmcwipersetc.com
On Sun, Oct 5, 2014 at 5:31 PM, Marcel J. Bourgon
wrote:
> Good morning all.
> Does any one have an extra oil fill pipe from oil filler in the front of
> the coach by engine door to engine itself. It looks like a metal pipe
> about 1" in diameter. I am rebuilding a Glennbrook and it was sold to
> me with many missing pieces.
> Any help would be greatly appreciated. I do not expect if for free and
> would be glad to pay a fair price
> Thanks
> Marcel in El Paso
> __
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] oil fill pipe [message #263529 is a reply to message #263481] |
Mon, 06 October 2014 04:43 |
g.winger
Messages: 792 Registered: February 2008 Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
3/4 thinwall conduit has an outside dia of about 1". Just under,,, will measure when I get home and compare to mine,,,,,,
|
|
|
Re: [GMCnet] oil fill pipe [message #263533 is a reply to message #263494] |
Mon, 06 October 2014 05:53 |
mjbourgon
Messages: 259 Registered: May 2010
Karma: -1
|
Senior Member |
|
|
Ken
Thanks, I never thought of that. I was concerned about the engine
heat. I will get out by heat gun
Marcel
On 10/5/2014 5:00 PM, Ken Henderson wrote:
> Marcel,
>
> A piece of PVC pipe in the appropriate size works great. A heat gun
> enables you to route it however you like. That's what I use for my Cad 500
> installation.
>
> HTH,
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
> Manny Brakes & 1-Ton, etc., etc.
> www.gmcwipersetc.com
>
> On Sun, Oct 5, 2014 at 5:31 PM, Marcel J. Bourgon
> wrote:
>
>> Good morning all.
>> Does any one have an extra oil fill pipe from oil filler in the front of
>> the coach by engine door to engine itself. It looks like a metal pipe
>> about 1" in diameter. I am rebuilding a Glennbrook and it was sold to
>> me with many missing pieces.
>> Any help would be greatly appreciated. I do not expect if for free and
>> would be glad to pay a fair price
>> Thanks
>> Marcel in El Paso
>> __
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] oil fill pipe [message #263542 is a reply to message #263533] |
Mon, 06 October 2014 08:38 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Marcel,
If you like I have two of the pipes available. I don't want them and you
can have them for the postage.
I live in Northern Colorado. What other parts do you need?
On Mon, Oct 6, 2014 at 4:53 AM, Marcel J. Bourgon
wrote:
> Ken
> Thanks, I never thought of that. I was concerned about the engine
> heat. I will get out by heat gun
> Marcel
> On 10/5/2014 5:00 PM, Ken Henderson wrote:
>> Marcel,
>>
>> A piece of PVC pipe in the appropriate size works great. A heat gun
>> enables you to route it however you like. That's what I use for my Cad
> 500
>> installation.
>>
>> HTH,
>>
>> Ken H.
>> Americus, GA
>> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
>> Manny Brakes & 1-Ton, etc., etc.
>> www.gmcwipersetc.com
>>
>> On Sun, Oct 5, 2014 at 5:31 PM, Marcel J. Bourgon mjbourgon@earthlink.net>
>> wrote:
>>
>>> Good morning all.
>>> Does any one have an extra oil fill pipe from oil filler in the front of
>>> the coach by engine door to engine itself. It looks like a metal pipe
>>> about 1" in diameter. I am rebuilding a Glennbrook and it was sold to
>>> me with many missing pieces.
>>> Any help would be greatly appreciated. I do not expect if for free and
>>> would be glad to pay a fair price
>>> Thanks
>>> Marcel in El Paso
>>> __
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
Re: [GMCnet] oil fill pipe [message #263568 is a reply to message #263542] |
Mon, 06 October 2014 11:39 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Some have used 1” EMT electrical conduit
JR Wright
78 Buskirk Stretch
75 Avion
Michigan
On Oct 6, 2014, at 9:38 AM, Bruce Hart wrote:
> Marcel,
> If you like I have two of the pipes available. I don't want them and you
> can have them for the postage.
> I live in Northern Colorado. What other parts do you need?
>
>
> On Mon, Oct 6, 2014 at 4:53 AM, Marcel J. Bourgon
> wrote:
>
>> Ken
>> Thanks, I never thought of that. I was concerned about the engine
>> heat. I will get out by heat gun
>> Marcel
>> On 10/5/2014 5:00 PM, Ken Henderson wrote:
>>> Marcel,
>>>
>>> A piece of PVC pipe in the appropriate size works great. A heat gun
>>> enables you to route it however you like. That's what I use for my Cad
>> 500
>>> installation.
>>>
>>> HTH,
>>>
>>> Ken H.
>>> Americus, GA
>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
>>> Manny Brakes & 1-Ton, etc., etc.
>>> www.gmcwipersetc.com
>>>
>>> On Sun, Oct 5, 2014 at 5:31 PM, Marcel J. Bourgon > mjbourgon@earthlink.net>
>>> wrote:
>>>
>>>> Good morning all.
>>>> Does any one have an extra oil fill pipe from oil filler in the front of
>>>> the coach by engine door to engine itself. It looks like a metal pipe
>>>> about 1" in diameter. I am rebuilding a Glennbrook and it was sold to
>>>> me with many missing pieces.
>>>> Any help would be greatly appreciated. I do not expect if for free and
>>>> would be glad to pay a fair price
>>>> Thanks
>>>> Marcel in El Paso
>>>> __
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> Milliken, Co
> GMC=Got More Class
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
Re: [GMCnet] oil fill pipe [message #263593 is a reply to message #263568] |
Mon, 06 October 2014 15:02 |
mjbourgon
Messages: 259 Registered: May 2010
Karma: -1
|
Senior Member |
|
|
Hi John
Hang on to those puppies and will give you another email with other
items I am Missing
Thanks
Marcel Bourgon 915 474-0988
On 10/6/2014 10:39 AM, John Wright wrote:
> Some have used 1” EMT electrical conduit
> JR Wright
> 78 Buskirk Stretch
> 75 Avion
> Michigan
>
> On Oct 6, 2014, at 9:38 AM, Bruce Hart wrote:
>
>> Marcel,
>> If you like I have two of the pipes available. I don't want them and you
>> can have them for the postage.
>> I live in Northern Colorado. What other parts do you need?
>>
>>
>> On Mon, Oct 6, 2014 at 4:53 AM, Marcel J. Bourgon
>> wrote:
>>
>>> Ken
>>> Thanks, I never thought of that. I was concerned about the engine
>>> heat. I will get out by heat gun
>>> Marcel
>>> On 10/5/2014 5:00 PM, Ken Henderson wrote:
>>>> Marcel,
>>>>
>>>> A piece of PVC pipe in the appropriate size works great. A heat gun
>>>> enables you to route it however you like. That's what I use for my Cad
>>> 500
>>>> installation.
>>>>
>>>> HTH,
>>>>
>>>> Ken H.
>>>> Americus, GA
>>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
>>>> Manny Brakes & 1-Ton, etc., etc.
>>>> www.gmcwipersetc.com
>>>>
>>>> On Sun, Oct 5, 2014 at 5:31 PM, Marcel J. Bourgon >> mjbourgon@earthlink.net>
>>>> wrote:
>>>>
>>>> > Good morning all.
>>>> > Does any one have an extra oil fill pipe from oil filler in the front of
>>>> > the coach by engine door to engine itself. It looks like a metal pipe
>>>> > about 1" in diameter. I am rebuilding a Glennbrook and it was sold to
>>>> > me with many missing pieces.
>>>> > Any help would be greatly appreciated. I do not expect if for free and
>>>> > would be glad to pay a fair price
>>>> > Thanks
>>>> > Marcel in El Paso
>>>> > __
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> Milliken, Co
>> GMC=Got More Class
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Goto Forum:
Current Time: Sat Oct 05 02:24:17 CDT 2024
Total time taken to generate the page: 0.01335 seconds
|