GMCforum: GMCnet » [GMCnet] Right exhaust manifold donut. Exchange book not clear to me

Home » Public Forums » GMCnet » [GMCnet] Right exhaust manifold donut. Exchange book not clear to me

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Right exhaust manifold donut. Exchange book not clear to me [message #262470]

Sun, 21 September 2014 11:25

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

Went to the parts store. Asked for one for a 76 Toro. Thinking wrongly that it would be the same as my 78-403. The one I need is smaller. Went to the GMCMI exchange book. It's not clear to me. Page 14. The last one I got was from Jim K. Our parts people have it right. I'm out of time at this point. Maybe one for a 78 Olds with a 403.Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Right exhaust manifold donut. Exchange book not clear to me [message #262487 is a reply to message #262470]

Sun, 21 September 2014 15:13

77Royale

Messages: 461
Registered: June 2014
Location: Mid Michigan

Karma: 6

Senior Member

Not sure by the posting if your asking for the correct one?

I replaced mine in a 77 Royale 403,

Part # EG24062

Oreilly's 4 bucks a piece, in stock, and they were the same ones as the ones I replaced.

77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy. Mid Michigan

Report message to a moderator

Re: [GMCnet] Right exhaust manifold donut. Exchange book not clear to me [message #262491 is a reply to message #262470]

Sun, 21 September 2014 15:23

C Boyd

Messages: 2629
Registered: April 2006

Karma: 18

Senior Member

Bob, I believe there are 2listed. You want the small one, 2 1/4" I'd.

BobDunahugh wrote on Sun, 21 September 2014 12:25

Went to the parts store. Asked for one for a 76 Toro. Thinking wrongly that it would be the same as my 78-403. The one I need is smaller. Went to the GMCMI exchange book. It's not clear to me. Page 14. The last one I got was from Jim K. Our parts people have it right. I'm out of time at this point. Maybe one for a 78 Olds with a 403.Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

Previous Topic:	[GMCnet] rally and info,
Next Topic:	[GMCnet] rear drums

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Feb 03 14:04:54 CST 2025

Total time taken to generate the page: 0.00612 seconds