GMCforum: GMCnet » Water Temp Sender

Home » Public Forums » GMCnet » Water Temp Sender (Water temp gauge not reading correctly)

Show: Today's Messages :: Polls :: Message Navigator

Water Temp Sender [message #260936]

Thu, 04 September 2014 22:58

watles

Messages: 2
Registered: August 2004
Location: Orem, Utah

Karma:

Junior Member

Had my engine rebuilt and they installed a RS6469 Water Temp Sender as suggested in the GMC MH Intl. Parts Exchange Index.
My Temp Gsuge just moves slightly above cold and just sits there. No variation with engine heat.
Had the Temp Gauge tested and it tested good.
Purchased and istalled another RS6469 from NAPA but no change.
Am I using the correct sender or is there another sender I should be using?
Engine is a 455 Jasper.
I hate to run without a working temp gauge.

Any suggestions?

Les Watson
Orem, Utah
77 Palm Beach
watles@gmail.com
Cell 801 360-0719

Report message to a moderator

[Message index]

		Water Temp Sender By: watles on Thu, 04 September 2014 22:58
		Re: Water Temp Sender By: Bullitthead on Fri, 05 September 2014 01:10
		Re: Water Temp Sender By: Bullitthead on Fri, 05 September 2014 01:15
		Re: [GMCnet] Water Temp Sender By: Gary Berry on Fri, 05 September 2014 09:25
		Re: [GMCnet] Water Temp Sender By: Otterwan on Fri, 05 September 2014 09:51
		Re: [GMCnet] Water Temp Sender By: powerjon on Fri, 05 September 2014 14:52
		Re: [GMCnet] Water Temp Sender By: Mr ERFisher on Fri, 05 September 2014 08:56
		Re: Water Temp Sender By: watles on Fri, 05 September 2014 11:56
		Re: Water Temp Sender By: Ken Burton on Fri, 05 September 2014 22:31

Previous Topic:	Gutted 1976 23' in Saanich B.C. $500
Next Topic:	[GMCnet] ladies on the net

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 17:27:39 CST 2024

Total time taken to generate the page: 0.01551 seconds