GMCforum: GMCnet » master cylinder and power assist

Home » Public Forums » GMCnet » master cylinder and power assist (need information for interchange)

Show: Today's Messages :: Polls :: Message Navigator

master cylinder and power assist [message #260012]

Mon, 25 August 2014 10:23

scheibejn

Messages: 35
Registered: March 2013
Location: Stillwater, MN

Karma:

Member

I just joined gmcmi and will soon receive the 2014 parts interchange book. In the meantime, I need to fix the brakes and find out which vehicles/part numbers/etc. will fit my 1977 Kingsley for pretty complete brake job. Disks, drums, pads, bearings seem good. Don't find much specific information for my vehicle - ebay, junk yards, classified and so forth. Need info. For the time being, have given up on my 4106 bus conversion.
Jim Scheibe

Jim Scheibe 1977 Kingsley 26' GMC PD(parlor diesel)4106, 93 Volvo, 96 Volvo, Oak Park Heights MN 55082 On the gorgeous St. Croix River lookin' at WI shore

Report message to a moderator

[Message index]

		master cylinder and power assist By: scheibejn on Mon, 25 August 2014 10:23
		Re: master cylinder and power assist By: tphipps on Mon, 25 August 2014 10:36
		Re: master cylinder and power assist By: cbwoodsr on Mon, 25 August 2014 11:45
		Re: master cylinder and power assist By: Larry on Mon, 25 August 2014 13:56
		Re: master cylinder and power assist By: scheibejn on Mon, 25 August 2014 14:41

Previous Topic:	[GMCnet] Should it stay or should it go now?
Next Topic:	[GMCnet] Olga now in Belgium

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 18:20:07 CDT 2024

Total time taken to generate the page: 0.02514 seconds