Running light circuit blows fuse [message #259901] |
Sun, 24 August 2014 10:40 |
The Dr
Messages: 75 Registered: July 2014 Location: Toledo, OR
Karma:
|
Member |
|
|
I recently got all my clearance lights working. I then took the coach in to get the exhaust system fixed. They replaced the pipe from the twin mufflers to the back with a 3 inch pipe and fixed some faulty welds at the mufflers. It looks great now. Now when the running lights are turned on it blows the 20 amp fuse immediately. It may be coincidence. I can't think of how the two could be related unless there is a wire run down the passenger side underneath that might have gotten melted. I couldn't see anything with a quick look.
Any ideas before I try tracing the wiring?
Thanks,
Mike
Mike Sauer
Toledo, OR
1975 26' Avion
1-ton front end, SullyBilt AirBag System, 3.21 tranny
|
|
|