Behind Glove Box [message #259166] |
Sun, 17 August 2014 19:30 |
Dave NJ
Messages: 10 Registered: September 2013 Location: NJ
Karma:
|
Junior Member |
|
|
Hi,
Today I started removing the cockpit elements. This is the last part of the interior that needs to be removed. I removed the cockpit side panels and the passenger seat and base. The plywood under the side panels is rotten from water damage. There was one mouse nest around the gas pipe behind the drivers side panel. There was a giant mouse nest in the front dash passenger corner that was exposed when I removed the passenger side panel. The entire passenger corner section was filled with nesting material.
The top plastic roof of the cockpit came down pretty easily and I was able to remove without any damage. It should cleanup nice.
My question is that behind the glove box in the lower corner is an opening I assume into the blower box. Should there be a cover plate over that opening?
Half of the opening is behind the glove box and half is below in the passenger floor area which is covered by a small wire grate.
Should there be any opening on the passenger floor?
[url=http://www.gmcmhphotos.com/photos/data/6658/medium/photo_114.JPG][url]
Dave NJ
Dave Curtiss
Mahwah NJ
1977 ex-Palm Beach now "Jersey Ltd. Edition"
Cad 500, Quad Bags
|
|
|