Water Tank fitting [message #258231] |
Fri, 08 August 2014 21:43 |
thorndike
Messages: 406 Registered: January 2011 Location: Conifer, Colorado
Karma:
|
Senior Member |
|
|
Howdy all!
As you can see from this picture, the water fill tube leading to my water tank is not effectively connected.
For those that don't see the picture inline, the link is here: http://i.imgur.com/u5Cuayt.jpg
If you can't tell from the image, a PO took a standard PVC elbow and used a mess of silicone caulk to hold it in place. You can see the remains of what appears to be duct tape that was used to hold the fill tube to the water tank.
I would like to fix this in such a way that the fill tube is mechanically connected to the tank. Unfortunately, there isn't a large access hole on the top so I am unable to reach the inside of the tank. Has anyone solved this issue? If so, how?
Thanks,
Bob
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
|
|
|