Governor Gear Assembly [message #257514] |
Sat, 02 August 2014 08:28 |
mickey szilagyi
Messages: 273 Registered: January 2013
Karma: 0
|
Senior Member |
|
|
In dealing with a failed governor gear it appears it would be really handy to have a spare governor gear assembly on board. And it seems like they might be in short supply. We are planning a trip to several junk yards and will search for governor gear assemblies.
The question is will any assembly off any Toronado 425 transmission work or could it be rebuilt to work. What should we look for? And are there any other transmissions that we could look for that would have a rebuildable governor gear assembly core that would work on our GMCs. We're thinking to get the assembly including the cover. Anything else we should try to recover in the process?
Mickey
1977 Kingsley, 403, Lansing, MI
|
|
|
|
|
Re: [GMCnet] Governor Gear Assembly [message #257540 is a reply to message #257516] |
Sat, 02 August 2014 17:43 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
The U-Pull -it in my area won't sell the governor separate from the
transmission. I tried but they wouldn't let me have it.
On Sat, Aug 2, 2014 at 8:30 AM, Wally Anderson
wrote:
> mickey szilagyi wrote on Sat, 02 August 2014 08:28
>> In dealing with a failed governor gear it appears it would be really
> handy to have a spare governor gear assembly on board. And it seems like
>> they might be in short supply. We are planning a trip to several junk
> yards and will search for governor gear assemblies.
>>
>> The question is will any assembly off any Toronado 425 transmission work
> or could it be rebuilt to work. What should we look for? And are there
>> any other transmissions that we could look for that would have a
> rebuildable governor gear assembly core that would work on our GMCs. We're
>> thinking to get the assembly including the cover. Anything else we
> should try to recover in the process?
>
> Mickey, Eldorado 67 to 78 governors will fit or trannys too. When ever I
> see one I grab it. Like two in the last 10 years.
> Good hunting!
> HTH
> --
> Wally Anderson
> 1975 Glenbrook
> Megasquirt 455 port injection science project
> Omaha Nebraska
> Greater Midwest Classics
> GMCES
> http://wallyandsue.blogspot.com/
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
Re: [GMCnet] Governor Gear Assembly [message #257557 is a reply to message #257543] |
Sat, 02 August 2014 22:44 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I would advise people from using used governor gears as most have seen the
life.
Plastic type component in a transmision in a motor home i going to see
higher temperature and they disintegrate.
New ones are available, so it would be best to get new.
I do not carry a spare gear as I make sure my transmission runs cooler than
most by 20 degrees.
I have seen articles in auto/truck publication eluding to this.
On Sat, Aug 2, 2014 at 4:58 PM, Mickey Szilagyi
wrote:
> Well, I was wondering about that, not being able to pick off parts of the
> tranny. But one of the places we frequent has trees growing up between the
> seats and engine comparements so they may not be as fussy.
> --
> Mickey
> 1977 Kingsley, 403, Lansing, MI
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Governor Gear Assembly [message #257563 is a reply to message #257557] |
Sun, 03 August 2014 02:40 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
jimk wrote on Sat, 02 August 2014 22:44I would advise people from using used governor gears as most have seen the
life.
Plastic type component in a transmision in a motor home i going to see
higher temperature and they disintegrate.
New ones are available, so it would be best to get new.
JimK - I believe they are referring to the entire governor assembly. You make a good point however that used governors should get a new gear installed. This includes used governors carried as spares. Easier to install this gear at home rather than on the road.
Mickey - the cover is a part of the governor assembly and cannot be removed without some cutting of the metal cover. It all comes out as one piece, floppy cover and all. (this is one of the things that makes working on these a bit of a problem.)
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Re: [GMCnet] Governor Gear Assembly [message #257564 is a reply to message #257557] |
Sun, 03 August 2014 02:41 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
jimk wrote on Sat, 02 August 2014 22:44I would advise people from using used governor gears as most have seen the
life.
Plastic type component in a transmision in a motor home i going to see
higher temperature and they disintegrate.
New ones are available, so it would be best to get new.
JimK - I believe they are referring to the entire governor assembly. You make a good point however that used governors should get a new gear installed. This includes used governors carried as spares. Easier to install this gear at home rather than on the road.
Mickey - the cover is a part of the governor assembly and cannot be removed without some cutting of the metal cover. It all comes out as one piece, floppy cover and all. (this is one of the things that makes working on these a bit of a problem.)
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Re: Governor Gear Assembly [message #257575 is a reply to message #257514] |
Sun, 03 August 2014 06:40 |
mickey szilagyi
Messages: 273 Registered: January 2013
Karma: 0
|
Senior Member |
|
|
Jim, yes, we would try to find the entire assemblies and then rebuild them with new governor gears, or use the core as the core trade for your rebuilt assemblies. If we could find the complete assemblies we would save them from the crusher and add to what seems to be a short supply of the governor gear assmebly cores.
Mickey
1977 Kingsley, 403, Lansing, MI
|
|
|
Re: [GMCnet] Governor Gear Assembly [message #257602 is a reply to message #257575] |
Sun, 03 August 2014 10:59 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Mickey and All,
There are subtle differences between the governor used for the motorhome and the one that is used for the cars. The ones that are taken off car transmission are useable but can be upgraded to motorhome specs.
http://www.appliedgmc.com/prod.itml/icOid/1024
Wally Anderson is a GMC Great Midwest Classics Member.
JR Wright
78 Buskirk Stretch
75 Avion
Michigan
On Aug 3, 2014, at 7:40 AM, Mickey Szilagyi wrote:
> Jim, yes, we would try to find the entire assemblies and then rebuild them with new governor gears, or use the core as the core trade for your rebuilt
> assemblies. If we could find the complete assemblies we would save them from the crusher and add to what seems to be a short supply of the governor
> gear assmebly cores.
> --
> Mickey
> 1977 Kingsley, 403, Lansing, MI
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|