| How Much Poly Armour Does it Take to Redo the Fuel Lines [message #257598] |
Sun, 03 August 2014 10:29  |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
I got a 35% off coupon from Advanced Auto and though I would use it to buy Poly Amour to replace the fuel lines in the GMC.
That would be two vent lines 3/8" to just before the gas fill up, one fuel line to carb and one 5/16" line to the generator.
I believe Jim K. posted this a few months back but I can't find his posting.
Promo code if anyone else wants to use it is MISSUH41 only good through August 4th or tomorrow.
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
|
|
| Re: How Much Poly Armour Does it Take to Redo the Fuel Lines [message #257606 is a reply to message #257598] |
Sun, 03 August 2014 11:21  |
Jon payne
Messages: 495
Registered: May 2008
Karma: 1
|
Senior Member |
|
|
Just did my this spring. For the top of the tanks, you need four 3/8" x 40" and two 5/16" x 40" lines. I say 40" because that is the closest length they sell to what you need. Also you need one foot of 1/4" line for the Onan. I'm thinking they are around $7 each, expect for the 1/4" line.
Jon
Jon Payne
76 Palm Beach
Westfield,IN
|
|
|
|
|
|
| Re: How Much Poly Armour Does it Take to Redo the Fuel Lines [message #257628 is a reply to message #257607] |
Sun, 03 August 2014 13:28 |
Joe Weir
Messages: 769
Registered: February 2013
Location: Columbia, SC
Karma: 7
|
Senior Member |
|
|
I used most of a 25' roll - $15. But after straightening it out, I would do the sticks next time.
76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center...
Columbia, SC.
|
|
|
|
| Re: [GMCnet] How Much Poly Armour Does it Take to Redo the Fuel Lines [message #257639 is a reply to message #257628] |
Sun, 03 August 2014 14:35 |
Jerry Wheeler
Messages: 246
Registered: January 2013
Karma: 2
|
Senior Member |
|
|
I finished my 77 transmode coach several weeks ago; used 2 25' rolls of 3/8
poly amour and had about 4 feet leftover. I did all metal on top of the
tanks (gas line and the two breather lines). Metal to the edge of the
tanks where I could attach short pieces of Gates Blockade rubber before
attaching to another metal line. This is the 4th coach I have done this
way. Yes, you have to straighten most of the amour lines.
JR Wheeler 78 Royale NC/OR
currently on the Oregon coast enjoying the 65 degree days and 53 degree
nights along with fresh salmon, crabs & clams.
On Sun, Aug 3, 2014 at 2:28 PM, Joe Weir wrote:
> I used most of a 25' roll - $15. But after straightening it out, I would
> do the sticks next time.
> --
> 76 Birchaven - New engine, trans, aluminum radiator, brakes, airbags, fuel
> lines, seats, upholstery, adult beverage center... those Coachmen guys were
> really thinking about us second hand owners...
> Columbia, SC.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] How Much Poly Armour Does it Take to Redo the Fuel Lines [message #257715 is a reply to message #257605] |
Mon, 04 August 2014 04:11 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Bob, yes I am gong to use the Poly Armour for my fuel lines.
On Sun, Aug 3, 2014 at 10:18 AM, Robert Peesel wrote:
> Bruce,
>
> I went to Advanced Auto Part's web site and I only see Poly Armour brake
> lines. Am I missing something, or are you looking to use brake lines as
> fuel
> lines?
>
> Bob
> --
> Robert Peesel
>
> 1976 Royale 26'
>
> Side Dry Bath
>
> Sterling, Va
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: How Much Poly Armour Does it Take to Redo the Fuel Lines [message #257717 is a reply to message #257628] |
Mon, 04 August 2014 05:26 |
Joe Weir
Messages: 769
Registered: February 2013
Location: Columbia, SC
Karma: 7
|
Senior Member |
|
|
Joe Weir wrote on Sun, 03 August 2014 13:28I used most of a 25' roll - $15. But after straightening it out, I would do the sticks next time.
Important note: I only used hard lines on top of the fuel tanks, low vapor FI hose everywhere else.
76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center...
Columbia, SC.
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
