Front end geometry online simulator [message #257446] |
Fri, 01 August 2014 14:05 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Anyone played with this site?:
http://www.vsusp.com/
Its an on-line front end suspension simulator. Punch in the various parameters and watch what happens.
You save your entries by saving the website address.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|
Re: [GMCnet] Front end geometry online simulator [message #257479 is a reply to message #257446] |
Fri, 01 August 2014 19:08 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Bruce,
That's quite a web site. Has anyone yet entered the OEM GMC & 1-Ton
parameters? One that I didn't find in my brief review is the knuckle
distance between ball joints.
Ken H.
On Fri, Aug 1, 2014 at 3:06 PM, Bruce Hislop wrote:
> Anyone played with this site?:
>
> http://www.vsusp.com/
>
> Its an on-line front end suspension simulator. Punch in the various
> parameters and watch what happens.
>
> You save your entries by saving the website address.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: Front end geometry online simulator [message #257498 is a reply to message #257446] |
Fri, 01 August 2014 22:14 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Ken,
Look under the steering knuckle tab. You need to enter the horizontal and vertical distances from the center of the hub to both the upper and lower ball joints. It then calculates the spacing between the upper and lower ball joints on the calculated column.
Seems like its fairly sophisticated.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|