GMCforum: GMCnet » Need Onan help

Home » Public Forums » GMCnet » Need Onan help (Onan 6K plug pinout connection to control board diagram)

Show: Today's Messages :: Polls :: Message Navigator

Need Onan help [message #255722]

Thu, 17 July 2014 17:27

larry.whisler

Messages: 356
Registered: August 2005

Karma:

Senior Member

I recently had some issues with trying to get the Onan to start
and continue running and decided to replace all of the flag
quick disconnects on the plug wires.

so, pulled the plug wires and connectors from the board and did
the replacement. Now I am reconnecting the wire set and not sure
if I have each of the wires going to the correct posts on the board.

I tried to find a diagram but had no luck. closest diagram I could
find was on bdub's site on the dinosaur board.

I am wanting to check pins 4 through 6 for correctness.

Can someone point me to a diagram?

thanks

larry

Report message to a moderator

[Message index]

		Need Onan help By: larry.whisler on Thu, 17 July 2014 17:27
		Re: Need Onan help By: wally on Thu, 17 July 2014 17:45
		Re: [GMCnet] Need Onan help By: Mr ERFisher on Thu, 17 July 2014 18:16
		Re: [GMCnet] Need Onan help By: larry.whisler on Thu, 17 July 2014 19:43
		Re: [GMCnet] Need Onan help By: A Hamilto on Thu, 17 July 2014 20:04
		Re: [GMCnet] Need Onan help By: A Hamilto on Thu, 17 July 2014 20:45

Previous Topic:	[GMCnet] Thanks to GMC buddies Tom and Marilyn!
Next Topic:	Re: [GMCnet] Possible 16" wheel for those who want a different offset and alcoa styling without spacers?

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 22 03:55:21 CDT 2024

Total time taken to generate the page: 0.03721 seconds